Panasonic KX-TCD430NZ operating instructions Selecting a base unit, Cancelling a handset

Page 24
Note:
LTo register the handset to another base unit or to the same base unit again, see manual registration (page 23).
Press {ih}.
9
LIf you changed PIN, enter it (page 19).
6 Press {v} repeatedly to select the desired base unit number, then press
{>}.
LThe selected base unit number will flash.
7 Press {>}.
8 Press {v} repeatedly to select “YES”, then press {>}.
LTo stop cancelling, select “NO”.
Enter “0000” (default handset PIN).
5
LThe selected handset number will flash.
6 Press {>}.
7 Wait until “SETTING BS” is displayed, then press {ih}.
Cancelling a base unit
A handset can be registered to a maximum of 4 base units. A handset can cancel a base unit that it is registered to. This will allow the handset to “forget” that base unit.
1 Press {j}.
2 Press {v} repeatedly to display “SETTING HS”, then press {>}.
3 Press {v} repeatedly to display “REGISTRATION”, then press {>}.
4 Press {v}repeatedly to display “CANCEL BS”, then press {>}.
Press the desired handset number.
5
Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 20).
4

Multi-unit Operation

successfully, a confirmation tone will sound, and w will stop flashing.

Note:

LIf all registered handsets start ringing in step 5, press {x} to stop, then start again from step 1.

Selecting a base unit

When “AUTO” is selected, the handset will automatically use any available base unit it is registered to. When a specific base unit is selected, the handset will make and receive calls using that base unit only. If the handset is out of range of that base unit, no calls can be made.

1Press {j}.

2Press {v} repeatedly to display “SETTING HS”, then press {>}.

3Press {v}repeatedly to display “SELECT BS”, then press {>}.

4Press {v} repeatedly to display “AUTO” or a specific base unit number, then press {>}.

LThe handset starts searching for the base unit.

Note:

LWhen a handset is registered to another base unit, this setting will automatically change to that base unit’s number even if “AUTO” was selected.

Cancelling a handset

A maximum of 6 handsets can be registered to a base unit. A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This will allow the base unit to “forget” the handset.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {7}.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Model No. KX-TCD430NZ Telephone Accessory information Included accessoriesAdditional/replacement accessories Model No DescriptionImportant information Location of controls HandsetBase unit Receiver Display Phonebook Talk NavigatorBattery installation Battery chargeBattery strength ConnectionsBattery replacement Turning the power on/offWall mounting Other features To edit a number in the redial list before calling itTo erase numbers in the redial list To store a number from the redial list into the phonebookAnswering calls Handset locatorEditing a stored entry Erasing a stored entryKeys To edit/correct a mistakeMaking calls using the phonebook Making calls using a hot keyHot key quick dial Assigning an entry in the phonebook to a hot keyCaller ID service Using toll services from Telecom or another companyCall minder Viewing caller information and calling backEditing a caller’s phone number before calling back Erasing caller informationStoring caller information into the phonebook ExampleGuide to handset settings 2nd menu 3rd menu Default settingHandset settings Time alarmRinger options Selecting the standby mode display Example Selecting the talk mode displayTone options Display optionsSetting call bar Call optionsSelecting the display language Other options Guide to base unit settings Base unit settingsAdjusting ringer volume Setting flash timeSetting pause length Setting call restrictionCancelling a restricted number Turning on/off call restrictionResetting the base unit to its default settings Storing emergency numbersChanging stored emergency numbers Operating additional units Registering a handset to a base unitAdditional handsets Additional base unitsCancelling a handset Selecting a base unitSetting all handsets to ring Setting the selected handsets to ringHandset To transfer a call directly without speaking to handsetTroubleshooting Handset beeps intermittently and/or 074 flashes Fully charged the batteries, but 074 still flashesCaller information is not displayed Cannot register a handset to a base unitRF Transmission Power Approx mW Power consumption, Base unit StandbyTechnical information Number of channels 120 DuplexIndex PINPage For your future reference Customer Support Centre Tel. No 272 Sales DepartmentManufacturer
Top Page Image Contents