Panasonic KX-TCD430NZ operating instructions Wall mounting

Page 8
L“SETTING BS” will be displayed.
6 Press {>}, then press {*} 2 times.
7 Enter the current day, month and year by selecting 2 digits for each.
Example: 17 May, 2004 Press {1}{7} {0}{5} {0}{4}.
LIf you make a mistake, press {C}. Digits will be cleared from the right.
8 Press {>}.
L“SETTING BS” will be displayed.
9 Press {ih}.
Note:
LIf a power failure occurs, set the time and date again.
Press {>}.
5
Setting the time and date
Important:
LConfirm that the AC adaptor is connected. LEnsure that w is not flashing.
1 Press {j}.
2 Press {v} repeatedly to display “SETTING BS”, then press {>}.
3 Press {*}.
4 Enter the current hour and minute by selecting 2 digits for each (24-hour time entry).
Example: 15:15 Press {1}{5} {1}{5}.
LIf you make a mistake, press {C}. Digits will be cleared from the right.

Preparation

Wall mounting

8 cm

Screws

Hooks

Note:

LMake sure the screws are securely fastened to the wall.

LUse the following wall template to position the screws before drilling.

8 cm

8

Image 8
Contents Model No. KX-TCD430NZ Telephone Accessory information Included accessoriesAdditional/replacement accessories Model No DescriptionImportant information Location of controls HandsetBase unit Receiver Display Phonebook Talk NavigatorBattery installation Battery chargeBattery strength ConnectionsBattery replacement Turning the power on/offWall mounting Other features To edit a number in the redial list before calling itTo erase numbers in the redial list To store a number from the redial list into the phonebookAnswering calls Handset locatorEditing a stored entry Erasing a stored entryKeys To edit/correct a mistakeMaking calls using the phonebook Making calls using a hot keyHot key quick dial Assigning an entry in the phonebook to a hot keyCaller ID service Using toll services from Telecom or another companyCall minder Viewing caller information and calling backEditing a caller’s phone number before calling back Erasing caller informationStoring caller information into the phonebook ExampleGuide to handset settings 2nd menu 3rd menu Default settingRinger options Handset settingsTime alarm Selecting the standby mode display Example Selecting the talk mode displayTone options Display optionsSelecting the display language Setting call barCall options Other options Guide to base unit settings Base unit settingsAdjusting ringer volume Setting flash timeSetting pause length Setting call restrictionCancelling a restricted number Turning on/off call restrictionChanging stored emergency numbers Resetting the base unit to its default settingsStoring emergency numbers Operating additional units Registering a handset to a base unitAdditional handsets Additional base unitsCancelling a handset Selecting a base unitSetting all handsets to ring Setting the selected handsets to ringHandset To transfer a call directly without speaking to handsetTroubleshooting Handset beeps intermittently and/or 074 flashes Fully charged the batteries, but 074 still flashesCaller information is not displayed Cannot register a handset to a base unitRF Transmission Power Approx mW Power consumption, Base unit StandbyTechnical information Number of channels 120 DuplexIndex PINPage Manufacturer For your future referenceCustomer Support Centre Tel. No 272 Sales Department