Panasonic KX-TCD430NZ operating instructions Technical information, Number of channels 120 Duplex

Page 29

Useful Information

Technical information

Standard: DECT (Digital Enhanced

Cordless Telecommunications),

GAP (Generic Access Profile)

Number of channels: 120 Duplex

Channels

Frequency range: 1.88 GHz to 1.9 GHz

Duplex procedure: TDMA (Time Division

Multiple Access)

Channel spacing: 1728 kHz

Bit rate: 1152 kbit/s

Modulation: GFSK (Gaussian Frequency

Shift Keying)

RF Transmission Power: Approx. 250 mW

Voice coding: ADPCM 32 kbit/s

Power source: AC adaptor 220–240 V, 50

Power consumption, Base unit: Standby:

Approx. 3.5 W, Maximum: Approx. 9.2 W

Operating conditions: 5 °C–40 °C, 20 %– 80 % relative air humidity (dry)

Dimensions, Base unit: Approx. 58 mm x 128 mm x 105 mm

Dimensions, Handset: Approx. 143 mm x 48 mm x 32 mm

Mass (weight), Base unit: Approx. 170 g

Mass (weight), Handset: Approx. 120 g

Note:

LSpecifications are subject to change.

LThe illustrations used in these operating instructions may differ slightly from the actual product.

Image 29

Contents Model No. KX-TCD430NZ Telephone Included accessories Accessory informationAdditional/replacement accessories Model No DescriptionImportant information Handset Location of controlsBase unit Receiver Display Phonebook Talk NavigatorBattery charge Battery installationBattery strength ConnectionsTurning the power on/off Battery replacementWall mounting To edit a number in the redial list before calling it Other featuresTo erase numbers in the redial list To store a number from the redial list into the phonebookHandset locator Answering callsErasing a stored entry Editing a stored entryKeys To edit/correct a mistakeMaking calls using a hot key Making calls using the phonebookHot key quick dial Assigning an entry in the phonebook to a hot keyUsing toll services from Telecom or another company Caller ID serviceCall minder Viewing caller information and calling backErasing caller information Editing a caller’s phone number before calling backStoring caller information into the phonebook Example2nd menu 3rd menu Default setting Guide to handset settingsRinger options Handset settingsTime alarm Example Selecting the talk mode display Selecting the standby mode displayTone options Display optionsSelecting the display language Setting call barCall options Other options Base unit settings Guide to base unit settingsAdjusting ringer volume Setting flash timeSetting call restriction Setting pause lengthCancelling a restricted number Turning on/off call restrictionChanging stored emergency numbers Resetting the base unit to its default settingsStoring emergency numbers Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base unitsSelecting a base unit Cancelling a handsetSetting the selected handsets to ring Setting all handsets to ringTo transfer a call directly without speaking to handset HandsetTroubleshooting Fully charged the batteries, but 074 still flashes Handset beeps intermittently and/or 074 flashesCaller information is not displayed Cannot register a handset to a base unitPower consumption, Base unit Standby RF Transmission Power Approx mWTechnical information Number of channels 120 DuplexPIN IndexPage Manufacturer For your future referenceCustomer Support Centre Tel. No 272 Sales Department