Panasonic KX-TCD430NZ Storing emergency numbers, Resetting the base unit to its default settings

Page 22

Useful Telephone Settings

6Press {C}.

7Press {>}, then press {ih}.

Storing emergency numbers

This feature determines which phone numbers may be dialled while the call bar feature is turned on. A total of 4 emergency numbers (memory locations 1–4) can be stored.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {*}.

6Enter the emergency number (8 digits max.).

LIf you enter a number when an emergency number is already displayed, the new number will erase the old number.

LTo select a different memory location, press {>} repeatedly and enter a number.

7Press {>}.

8Press {ih}.

Note:

LThe default setting for emergency numbers are stored in the first 3 memory locations. It is recommended that you do not overwrite these numbers.

Changing stored emergency numbers

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {*}.

6Press {>} repeatedly to display the desired number.

7Press {C} and enter the new emergency number.

8Press {>}.

9Press {ih}.

Resetting the base unit to its default settings

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {0}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {>}, then press {ih}.

Note:

LFor the default settings, see page 20.

LThe emergency number setting will not be reset.

22

Image 22

Contents Model No. KX-TCD430NZ Telephone Additional/replacement accessories Accessory informationIncluded accessories Model No DescriptionImportant information Base unit Location of controlsHandset Receiver Display Phonebook Talk NavigatorBattery strength Battery installationBattery charge ConnectionsBattery replacement Turning the power on/offWall mounting To erase numbers in the redial list Other featuresTo edit a number in the redial list before calling it To store a number from the redial list into the phonebookAnswering calls Handset locatorKeys Editing a stored entryErasing a stored entry To edit/correct a mistakeHot key quick dial Making calls using the phonebookMaking calls using a hot key Assigning an entry in the phonebook to a hot keyCall minder Caller ID serviceUsing toll services from Telecom or another company Viewing caller information and calling backStoring caller information into the phonebook Editing a caller’s phone number before calling backErasing caller information ExampleGuide to handset settings 2nd menu 3rd menu Default settingTime alarm Handset settingsRinger options Tone options Selecting the standby mode displayExample Selecting the talk mode display Display optionsCall options Setting call barSelecting the display language Other options Adjusting ringer volume Guide to base unit settingsBase unit settings Setting flash timeCancelling a restricted number Setting pause lengthSetting call restriction Turning on/off call restrictionStoring emergency numbers Resetting the base unit to its default settingsChanging stored emergency numbers Additional handsets Operating additional unitsRegistering a handset to a base unit Additional base unitsCancelling a handset Selecting a base unitSetting all handsets to ring Setting the selected handsets to ringHandset To transfer a call directly without speaking to handsetTroubleshooting Caller information is not displayed Handset beeps intermittently and/or 074 flashesFully charged the batteries, but 074 still flashes Cannot register a handset to a base unitTechnical information RF Transmission Power Approx mWPower consumption, Base unit Standby Number of channels 120 DuplexIndex PINPage Customer Support Centre Tel. No 272 Sales Department For your future referenceManufacturer