Panasonic KX-TCD430NZ operating instructions Setting pause length, Setting call restriction

Page 21
Useful Telephone Settings
LTo cancel a selected handset number, press the number again. The number will stop flashing.
6 Press {>}.
7 Enter the phone number to be restricted (8 digits max.).
LIf you enter a number when a previously stored number is already displayed, the new number will erase the old number.
LTo select a different memory location, press {>} repeatedly and enter a number.

7Select the desired setting by pressing {1} for 100 ms or {2} for 600 ms.

8Press {>}, then press {ih}.

Setting pause length

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {3}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {3}.

6Select the desired setting by pressing {1} for 3 seconds or {2} for 5 seconds.

7Press {>}, then press {ih}.

Setting call restriction

You can restrict selected handsets from dialling certain phone numbers. You can assign up to 10 phone numbers (memory locations 1–10) to be restricted per handset. If a restricted number is dialled, the call will not be connected and the restricted number will flash on the display. For example, storing an area code will prevent a handset from dialling a long distance call.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

LAll the registered handset numbers will be displayed.

LFlashing numbers indicate call restriction is turned on for the corresponding handset.

5Press the desired handset numbers.

LThe selected handset numbers will flash.

8Press {>}.

9Press {ih}.

Turning on/off call restriction

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

LHandset numbers will be displayed. Flashing numbers indicate call restriction is on; non-flashing numbers indicate call restriction is off.

5Press the desired handset numbers to turn on/off.

6Press {>}, then press {ih}.

Cancelling a restricted number

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {>} repeatedly to display the desired number.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model No. KX-TCD430NZ Telephone Included accessories Accessory informationAdditional/replacement accessories Model No DescriptionImportant information Handset Location of controlsBase unit Receiver Display Phonebook Talk NavigatorBattery charge Battery installationBattery strength ConnectionsTurning the power on/off Battery replacementWall mounting To edit a number in the redial list before calling it Other featuresTo erase numbers in the redial list To store a number from the redial list into the phonebookHandset locator Answering callsErasing a stored entry Editing a stored entryKeys To edit/correct a mistakeMaking calls using a hot key Making calls using the phonebookHot key quick dial Assigning an entry in the phonebook to a hot keyUsing toll services from Telecom or another company Caller ID serviceCall minder Viewing caller information and calling backErasing caller information Editing a caller’s phone number before calling backStoring caller information into the phonebook Example2nd menu 3rd menu Default setting Guide to handset settingsHandset settings Time alarmRinger options Example Selecting the talk mode display Selecting the standby mode displayTone options Display optionsSetting call bar Call optionsSelecting the display language Other options Base unit settings Guide to base unit settingsAdjusting ringer volume Setting flash timeSetting call restriction Setting pause lengthCancelling a restricted number Turning on/off call restrictionResetting the base unit to its default settings Storing emergency numbersChanging stored emergency numbers Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base unitsSelecting a base unit Cancelling a handsetSetting the selected handsets to ring Setting all handsets to ringTo transfer a call directly without speaking to handset HandsetTroubleshooting Fully charged the batteries, but 074 still flashes Handset beeps intermittently and/or 074 flashesCaller information is not displayed Cannot register a handset to a base unitPower consumption, Base unit Standby RF Transmission Power Approx mWTechnical information Number of channels 120 DuplexPIN IndexPage For your future reference Customer Support Centre Tel. No 272 Sales DepartmentManufacturer
Top Page Image Contents