Making/Answering Calls
Making calls
1Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}.
2{C}
3When you finish talking, press {ih} or place the handset on the
base unit or charger.
Using the speakerphone
1Dial the phone number, and press {s}.
L Speak alternately with the other party.
2When you finish talking, press {ih}.
Note:
L For best performance, use the speakerphone in a quiet environment.
L To switch back to the receiver, press {C}.
Adjusting the receiver or speaker volume
Push the joystick up or down repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored in the redial list (each 24 digits max.).
1j (right soft key)
2{V}/{^}: Select the desired phone number.
3{C} / {s}
L If {s} is pressed and the other party’s line is engaged, the unit automatically redials multiple times. While the handset is waiting to redial, the ringer
indicator flashes. To cancel, press {ih}.
Editing/erasing/storing
1j (right soft key)
2{V}/{^}: Select the desired phone number. i K
3Proceed with the desired operation.
■Editing a number before
calling:
{V}/{^}: “Edit and Call” i M iUse the joystick to move
the cursor. i Edit the number. i {C}
■Erasing a number:
{V}/{^}: Select “Erase” or “Erase All”. i M i {V}/{^}: “Yes” i M i {ih}
■Storing a number to the
phonebook:
{V}/{^}: “Add Phonebook” i M i To store the name, continue from step 3, “Adding entries”, page 19.
Note:
L When editing:
–To erase a number, place the cursor on the number, then press {C/T}.
–To insert a number, place the cursor to the right of where you want to insert the number, then press the appropriate dial key.
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 21).
16