Panasonic KX-TG3651BX Setting up the unit before use, Dialing mode, Date and time

TG3651BX(e).book Page 12 Monday, May 31, 2010 8:51 AM

Preparation

Battery level

Battery icon	Battery level
1	High
2	Medium
3	Low
	L Needs to be charged.
4	Empty

Note:

L The batteries need to be charged if:

–“Recharge battery” or 4displays on the handset display.

–the handset beeps intermittently while it is in use.

Panasonic Ni-MH battery performance (supplied batteries)

Operation	Operating time
In continuous use	5 hours max.
Not in use (standby)	150 hours max.

Note:

L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).

L Even after the handset is fully charged, the handset can be left on the charger without any ill effect on the batteries.

LThe battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the charger and let it charge for at least 6 hours.

Setting up the unit before use

Symbol meaning:

Symbol	Meaning
=	Perform with the base unit.
Y	Perform with the handset.
Example:	Press {<} or {>} to select
{<}/{>}: “Off”	the words in quotations.
Example:	Press {V} or {^} to select
{V}/{^}:	the desired phone number
	or entry.

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”.

“Tone”: For tone dial service.

“Pulse”: For rotary/pulse dial service.

YHandset

1!i{#}{0}{7}{9}

2{<}/{>}: Select the desired setting.

3Ii{i}

Date and time

YHandset

1!i{#}{0}{0}{1}

21 Enter the current date and month by selecting 2 digits for each.

2 Enter the current year by selecting 4 digits. Example: 8 December, 2010

{0}{8} {1}{2} {2}{0}{1}{0}

3Enter the current hour and minute (24-hour clock format) by selecting 2 digits for each. Example: 21:30

{2}{1} {3}{0}

4Ii{i}

Note:

LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.

L The time shows on the base unit display.

12