TG3651BX(e).book Page 23 Monday, May 31, 2010 8:51 AM
Programming
Special instructions for programmable settings
Setting the selective ring/call block for specified phone number (individual call setting) (Caller ID subscribers only)
This feature allows you to select which unit rings (Selective ring) or reject calls (Call block) for specified phone numbers. You can store up to 10 phone numbers using the caller list or by entering the numbers directly.
The following settings are available:
–“Call=Base” or “Call=HS1” (Selective ring): You can select which unit rings when the unit receives a call from a designated caller. Only the selected base unit or handset rings and only its user can answer the call.
–“Call block”: The unit rejects calls that you do not want to answer such as junk calls. The base unit and handset do not ring when the unit receives a call from a designated caller.
Important:
L For call waiting service users:
When you receive a call while on the call, this feature does not work.
Note:
L Depending on your service provider/telephone company or PBX system, the base unit and handset may both ring for a short time while identifying a caller.
L The rejected call is logged as a missed call in the caller list.
L The rejected caller is charged for the call.
Storing desired callers from the caller list
1{>} CALLER ID
2{V}/{^}: Select the desired entry. iI
3Press {#} to select “Indiv. call”.
4Edit the phone number if necessary (from 5 digits to 22 digits).
L The vacant entry number is selected automatically.
5I
6{<}/{>}: Select the desired setting.
7Ii{i}
Storing desired callers by entering phone number
1!i{#}{1}{3}{6}
2{<}/{>}: “On” iI
3{V}/{^}: Select the vacant entry number.
4Enter the phone number (from 5 digits to 22 digits). iI
5{<}/{>}: Select the desired setting.
6I
L To add other entries, repeat from step 3.
7{i}
Editing an entry
1!i{#}{1}{3}{6}
2{<}/{>}: “On” iI
3{V}/{^}: Select the desired entry.
4Edit the phone number (from 5 digits to 22 digits). iI
5{<}/{>}: Select the desired setting.
6Ii{i}
Erasing an entry
1!i{#}{1}{3}{6}
2{<}/{>}: “On” iI
3{V}/{^}: Select the desired entry.
4Press and hold {CLEAR} to delete the number.
5Ii{i}
Turning the individual call setting mode (the selective ring/call block) off
1!i{#}{1}{3}{6}
2{<}/{>}: “Off”
3Ii{i}
23