TG3651BX(e).book Page 24 Monday, May 31, 2010 8:51 AM
Programming
Night mode
Night mode allows you to select a period of time during which all of the units will not ring for outside calls. This feature is useful for time period when you do not want to be disturbed, for example, while sleeping.
Important:
L Set the date and time beforehand (page 12).
L When the night mode is activated, the base unit does not sound the confirmation tones and error tones.
L The ringer tone for intercom calls is heard.
L When the date and time are incorrect, the night mode is activated incorrectly.
1!i{#}{1}{1}{7}
2{<}/{>}: Select “On” or “Off”.
3I
L If you select “Off”, press {i}.
4Enter the desired hour and minute you wish to start and end this feature.
5Ii{i}
Note:
LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.
L When the night mode is turned on, 3is displayed on the base unit.
24