Panasonic VA-824, VA-30940D, VA-30920, VA-30910, VA-30941D manual If MIC key is not pressesd, Bei

Page 17

This can be to telephones in all zones in the system.

r3

 

lzl

1. Lift handset

* Listen for the intercom dial-tone.

 

+

 

2. Press dial keys #OO

m

+

3. Make your announcement into the mouthpiece of handset

When answering a paging call, pick up the handset and press * key twice.

(Note that if external speaker is connected, the paging both for all zone and external will be made. To make the external paging only, see page 34.)

When answering to a voice call or tone call, simply lift handset. (If the telephone having speakerphone, simply press the

ON/OFF key.)

You can .answer to call without lifting handset (on-hook).

Before receiving any calls check to see that the microphone indicator lights up.

If it does not light up (microphone is off), press the MIC key so that the microphone indicator lights.

Speak through the built-in microphone and speaker

G&5* M/C indicator will flash. cl

IF MIC key is not pressesd

MC -

1. Press MIC key

bEI

+

* M/C indicator will flash.

L-

2. YOU can speak with telephone on-hook

Q

16

Image 17
Contents E r a t i n g Instructions COL Table of Contents Case of a Power Failure Pause Function Flash Function Signal Conversion from pulseIntercom Dial Tone Mute Speakerphone Toll RestrictionPage 18-f @iI Press any available line key To store a number To save a numberTo make a call To erase a number stored To make a call \ITo store a number from extension 10 only To erase a stored number from extension 10 only To make a callTo answer a call on a telephone which does not ring To answer a call on a telephone which ringsPutting call on hold Pickinq up held lineIf the extension is busy Transferrinq a call to another extensionAlternatively Three-party conference Line indicator will flash greenPage BEI If MIC key is not pressesdTo release hold Putting an intercom call on holdConf For VA-824 LJON/OR Features are stored as followsWhen using FF key To release SettinqPress ON/OFF key Storing To erase stored number One-touch operationIEI EaON/OR When dialinq Call is transmitted by tone signals Answering CallingSetting time from extension 10 only To release alarm setting Settinq alarmConfirminq number Dial number displayDisplay during call Other cases Optional Equipment To answer telephone which does not ringTo release door lock To silence an alarm on telephoneTo silence an alarm on sensor To enter an account number and dial To call an extension while talking with another extension To transfer an outside call to an extensionYou will bear the intercom dial tone from handset Dimensions Inch Heigh x Width x Depth, Weight Pound Page Receiving and Following Th?@i% ‘cr ‘-‘ Storing and Setting Press El one-touch key Ress Conf