Panasonic VA-12022B, VA-824, VA-30940D, VA-30920, VA-30910 Call is transmitted by tone signals

Page 29

.i

By pressing FLASH key, you can terminate an outside or intercom call.

Having terminated an outside call, you are once again automatically connected to an outside line.

If you wish to make a call immediately after another, without replacing handset press FLASH key and dial.

When you want to answer a call waiting which rings, press FLASH key.

Even if the telephone line is a rotary dialing system (dial pulse), you can send out DTMF tone signals.

By pressing the * key after dialing telephone number, call is transmitted by tone signals. Replacing the handset on the cradle will automatically return the telephone to its original dial pulse line signaling.

1.Make a call on dial pulse line

2.Press dial key *

*The call is transmitted by tone signals.

: :

The intercom dial tone heard from the handset or speaker can be silenced.

By repeating the suspending operation, the intercom dial tone is made to sound once more.

1.Press ON/OFF key

2.Press dial keys #51#

3.Press ON/OFF key

28

Image 29
Contents E r a t i n g Instructions COL Table of Contents Case of a Power Failure Pause Function Flash Function Signal Conversion from pulseIntercom Dial Tone Mute Speakerphone Toll RestrictionPage 18-f @iI Press any available line key To store a number To save a numberTo make a call To erase a number stored To make a call \ITo store a number from extension 10 only To erase a stored number from extension 10 only To make a callTo answer a call on a telephone which does not ring To answer a call on a telephone which ringsPutting call on hold Pickinq up held lineIf the extension is busy Transferrinq a call to another extensionAlternatively Three-party conference Line indicator will flash greenPage BEI If MIC key is not pressesdTo release hold Putting an intercom call on holdConf For VA-824 LJON/OR Features are stored as followsWhen using FF key To release SettinqPress ON/OFF key Storing To erase stored number One-touch operationIEI EaON/OR When dialinq Call is transmitted by tone signals Answering CallingSetting time from extension 10 only To release alarm setting Settinq alarmConfirminq number Dial number displayDisplay during call Other cases Optional Equipment To answer telephone which does not ringTo release door lock To silence an alarm on telephoneTo silence an alarm on sensor To enter an account number and dial To call an extension while talking with another extension To transfer an outside call to an extensionYou will bear the intercom dial tone from handset Dimensions Inch Heigh x Width x Depth, Weight Pound Page Receiving and Following Th?@i% ‘cr ‘-‘ Storing and Setting Press El one-touch key Ress Conf