Panasonic VA-30920, VA-30940D, VA-30910, VA-30941D, VA-30942D, VA-30960, VA-30965, VA-82110 For VA-824

Page 20

ADDITIONAL FEATURES

This system has various features for your added convenience.

By system programming you can establish functions to suit your objectives.

Please consult your dealer/installer about programming.

By pressing dial key 9 you are connected with an available outside line automatically. When you use this feature you do not need to select an available line by pressing a line key.

If all the lines are being used, you will hear the busy tone.

This feature is convenient for when using a single line telephone. -

In the FCC rules, this feature is regarded as one of the distinguishing features of the key system as against the PBX.

In the form the unit is shipped from the factory this feature cannot be programmed unless one jumper on the key service unit board is cut.

When you use this feature, inform the telephone company of registration number which for the system modification.

1.Lift handset or press ON/OFF key

*You will hear the intercom dial tone.

2.Press dial key 9

*Listen for the outside dial tone.

3.Dial the telephone number

You can specify a particular line for dialing outside calls. If the line is being used, you will hear the busy tone. Idle COL key can be used for FF key.

1.Lift handset or press ON/OFF key

*You will hear the intercom dial tone.

2.press dial key 8

3.Press the dial key to obtain the desired outside line

l - 3

for

VA-309

l - 8

for

VA-824

01 - 12

for

VA-1232

* Listen for the outside dial tone.

4. Dial the telephone number

19

-

Image 20
Contents E r a t i n g Instructions COL Table of Contents Pause Function Flash Function Signal Conversion from pulse Case of a Power FailureIntercom Dial Tone Mute Speakerphone Toll RestrictionPage 18-f @iI Press any available line key To store a number To save a numberTo make a call To make a call \I To erase a number storedTo store a number from extension 10 only To make a call To erase a stored number from extension 10 onlyTo answer a call on a telephone which rings To answer a call on a telephone which does not ringPutting call on hold Pickinq up held lineIf the extension is busy Transferrinq a call to another extensionAlternatively Line indicator will flash green Three-party conferencePage If MIC key is not pressesd BEIPutting an intercom call on hold To release holdConf For VA-824 Features are stored as follows LJON/ORWhen using FF key Settinq To releasePress ON/OFF key Storing One-touch operation To erase stored numberIEI EaON/OR When dialinq Call is transmitted by tone signals Calling AnsweringSetting time from extension 10 only Settinq alarm To release alarm settingConfirminq number Dial number displayDisplay during call Other cases To answer telephone which does not ring Optional EquipmentTo release door lock To silence an alarm on telephoneTo silence an alarm on sensor To enter an account number and dial To transfer an outside call to an extension To call an extension while talking with another extensionYou will bear the intercom dial tone from handset Dimensions Inch Heigh x Width x Depth, Weight Pound Page Receiving and Following Th?@i% ‘cr ‘-‘ Storing and Setting Press El one-touch key Ress Conf