Panasonic VA-30940D, VA-824, VA-30920, VA-30910, VA-30941D, VA-30942D, VA-30960, VA-30965, VA-82110 Conf

Page 19

You can transfer an intercom call to another extension. When transferring, temporarily put the call on hold, dial the other extension and have a three-party conversation. Then when you hang up or press FLASH key you drop out of the conversation leaving the other two parties to continue.

	HOLD	1. Press HOLD key to put the call on hold
	!a	* /NT indicator will flash. You will hear the continuous
	!a	intercom dial tone.
		2. Dial the desired extension number
		3. When answered, indicate that you want to transfer the call
	a	4. Press CONF key
	a	* You have a three-party conversation.
	CONF	* You have a three-party conversation.
	CONF
		5. Hang up
		* The other two parties continue their conversation.

You can converse with three parties at the same time.

1.Press HOLD key to put the call on hold

*/NT indicator will flash. You will hear the continuous tone.

2.Dial the extension number of the additional party

3.When answered, indicate that you wish to have a three- party conference

4.Press-CONF key to enable three-party cbnference

* INT indicator will light up.

-

:._I

.

..’

18

Image 19

Contents E r a t i n g Instructions COL Table of Contents Toll Restriction Pause Function Flash Function Signal Conversion from pulseCase of a Power Failure Intercom Dial Tone Mute SpeakerphonePage 18-f @iI Press any available line key To make a call To save a numberTo store a number To erase a number stored To make a call \ITo store a number from extension 10 only To erase a stored number from extension 10 only To make a callPickinq up held line To answer a call on a telephone which ringsTo answer a call on a telephone which does not ring Putting call on holdAlternatively Transferrinq a call to another extensionIf the extension is busy Three-party conference Line indicator will flash greenPage BEI If MIC key is not pressesdTo release hold Putting an intercom call on holdConf For VA-824 LJON/OR Features are stored as followsWhen using FF key To release SettinqPress ON/OFF key Storing To erase stored number One-touch operationIEI EaON/OR When dialinq Call is transmitted by tone signals Answering CallingSetting time from extension 10 only To release alarm setting Settinq alarmDisplay during call Dial number displayConfirminq number Other cases Optional Equipment To answer telephone which does not ringTo silence an alarm on sensor To silence an alarm on telephoneTo release door lock To enter an account number and dial To call an extension while talking with another extension To transfer an outside call to an extensionYou will bear the intercom dial tone from handset Dimensions Inch Heigh x Width x Depth, Weight Pound Page Receiving and Following Th?@i% ‘cr ‘-‘ Storing and Setting Press El one-touch key Ress Conf