Panasonic KX-TG4771B Making calls, Using the base unit, Adjusting the receiver or speaker, Volume

Making/Answering Calls

		3 When you finish talking, press MOFFN or place
Making calls
				the handset on the charger.
		Using the speakerphone
Using the base unit
		1		Dial the phone number and press M			N.
1 Dial the phone number.
		2		R Speak alternately with the other party.
	R To correct a digit, press MCLEARN.					M	N
2 Lift the corded handset.				When you finish talking, press OFF .
		Note:
3 When you finish talking, place the corded
		R For best performance, use the speakerphone in
	handset on the cradle.
			a quiet environment.
Note:		R To switch back to the receiver, press
R You can also dial the phone number after lifting			M	N/M	N.
	the corded handset.
		Making a call using the redial list
		The last 5 phone numbers dialed are stored in the
Using the speakerphone
		redial list (each 48 digits max.).
1 During a conversation on the corded handset,
		1 MREDIALN or MEN REDIAL
	press MSP-PHONEN to turn on the
				R If there is a new message in the voice mail
	speakerphone.
				or answering system, MREDIALN is not
	R You can place the corded handset on the
				displayed.
	cradle.
		2 MbN: Select the desired phone number.
	R Speak into the base unit microphone.
	R Speak alternately with the other party.	3		M	N
2 When you finish talking, press MSP-PHONEN.
		Erasing a number in the redial list
Note:
		1 MREDIALN or MEN REDIAL
R For best performance, use the speakerphone in		2 MbN: Select the desired phone number. a
	a quiet environment.
				MERASEN
R To switch to the receiver, lift the corded handset.		3
				MbN: “Yes” a MSELECTN
Making a call using the redial list		4		MOFFN
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).		Adjusting the receiver or speaker
1	MREDIALN	volume
2 MbN: Select the desired phone number.
3 Lift the corded handset.			Base unit
		Press MDN or MCN repeatedly while talking.
Erasing a number in the redial list
1	MREDIALN		Handset
		Press MjN or MkN repeatedly while talking.
2 MbN: Select the desired phone number. a
3	MERASEN	Note for handset:
	MbN: “Yes” a MSELECTN	R There are 5 volume levels (1 to 5) for the
4	MEXITN		receiver. When you change the receiver volume
			to level 5 (maximum level), the volume returns
			to level 4 (default) after you hang up.
Using the handset

1Lift the handset and dial the phone number. R To correct a digit, press MCLEARN.

2Press MN or MCALLN.

For assistance, please visit http://www.panasonic.com/help 13