Preparation
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service.
Handset
1{MENU} i{0}{5}{1}
2{V}/{^}: Select the desired setting.
3{Save} i{OFF}
Date and time
Set the correct date and time.
–To use the available alarm function (page 29).
–When you play back a message from the answering system (page 31), the unit announces the day and time it was recorded.
Handset
1{MENU} i{4}{1}
2Enter the current month, day, and year by selecting 2 digits for each. Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
3Enter the current hour and minute
Example: 9:30
{0}{9} {3}{0}
4{AM/PM}: Select “AM” or “PM”.
5{Save} i{OFF}
Note:
LIf you make a mistake when entering the date and time, press {<}, {>}, {^}, or {V} to move the cursor, then make the correction.
LThe date and time may be incorrect after a power failure. In this case, set the date and time again.
14For assistance, please visit http://www.panasonic.com/help