To establish a conference call: Press {Conf}.
LTo leave the conference, press {OFF}. The other parties can continue the conversation.
LTo put the outside call on hold, press {HOLD}. To resume the conference, press {Conf}.
Base unit
1During an outside call, press
{LOCATOR/INTERCOM} to put the call on hold.
2To page a specific handset, enter its extension number ({1} – {4}).
To page all handsets, press {0} or wait for a few seconds.
3Wait for the paged party to answer. LIf the paged party does not answer, press {LOCATOR/INTERCOM} to
return to the outside call.
4To complete the transfer: Press
LThe outside call is being routed to the handset.
To establish a conference call: Press {CONF}.
LTo leave the conference, press
LTo put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}.
Answering transferred calls
Handset
Press {C} to answer the page.
Base unit
Press
Note for handset and base unit: LAfter the paging party disconnects,
you can talk to the outside caller.
Registering a handset
The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.
1Handset:
{MENU} i{0}{0}{1}
2Base unit:
Press and hold {LOCATOR/ INTERCOM} until the IN USE indicator flashes.
LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
3Handset:
Press {OK}, then wait until a beep sounds.
4{OFF}
Registering an additional handset See page 5 for information on the available model.
Start from step 2.
Deregistering a handset
1{MENU} i{0}{0}{2}
2{3}{3}{5} i{OK}
3Select the handset you want to cancel by pressing the desired handset number ({1} – {4}).
For assistance, please visit http://www.panasonic.com/help | 39 |