Caller ID Service
3 1 – Area code – Local phone number
Example:
4{C}
Caller ID number auto edit feature
Once you call back an edited number, the unit will remember the Area Code and Format of the Edited Number. Next time when someone calls from the same Area Code, caller information will be customized by the unit as follows:
–When the call is being received, the Caller ID number will be displayed in the same Format as the Edited Number.
–After the call is ended, the phone number of the caller, when reviewed from the Caller list, will be displayed in the same Format as the Edited
Number.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code.
To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.
This feature can be turned on or off (page 27).
Note:
LPhone numbers from the 4 most recently edited area codes are automatically edited.
LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and
reprogram the area codes you want to edit once again.
Storing caller information into the phonebook
1{View CID}
2{V}/{^}: Select the desired item. i
{Select}
LTo edit the number, press {Edit} repeatedly until the phone number is shown in the desired format.
3{Save}
LIf there is name information for the caller, skip to step 5.
4Enter the name (see the character table, page 20). i{Next} i
{Save}
5{OFF}
Erasing selected caller information
1{View CID}
2{V}/{^}: Select the desired item.
3{Erase} i{Yes} i{OFF}
Erasing all caller information
1{View CID}
2{All erase} i{Yes}
24For assistance, please visit http://www.panasonic.com/help