Programming
Programmable settings
You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods:
–scrolling through the display menus (page 40)
–using the direct commands (page 45)
LMainly the direct command method is used in these operating instructions. LTo change the base unit ringer volume and tone, see page 26.
Programming by scrolling through the display menus
1
2
3
{MENU} (middle soft key)
Press {^}, {V}, {<}, or {>} to select the desired menu. i{SELECT}
LIf there are
Press {^}, {V}, {<}, or {>} to select (. i{SELECT}
Then press {^} or {V} to select “Ringer volume”. i{SELECT}
Press {^} or {V} to select the desired setting.
LThis step may vary depending on the feature being programmed.
4 {SAVE} i{OFF}
40