Programming
Feature | Feature | Setting code | System | Page |
| code |
| setting*1 |
|
To play all | {3}{2}{4} | – | – | 55 |
(All message playback) |
|
|
|
|
To play new | {3}{2}{3} | – | – | 55 |
(New message |
|
|
|
|
playback) |
|
|
|
|
VM tone detect | {3}{3}{2} | {1}: <On> {0}: Off | r | 61 |
*1 If “System setting” column is checked, you do not need to program the same item using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.
*4 The recall time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary.
You can access your service provider/telephone company “Call Waiting” service by having the recall time set at 100 ms, and then follow your service provider/telephone company “Call Waiting” instructions to operate this service.
*5 Generally, the line mode setting should not be adjusted. If Sis not displayed or the IN USE indicator on the base unit does not light properly when another phone connected to the same line is in use, you need to change the line mode to “A”.
*6 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
Color display models only:
Feature | Feature | Setting code | System | Page |
| code |
| setting*1 |
|
Appearance | {1}{8}{2} | {1}: <Color1> | – | – |
(Display color) |
| {2}: Color2 {3}: Color3 |
|
|
|
| {4}: Color4 {5}: Color5 |
|
|
Memory status | {6}{7}{0} | – | – | 51 |
Wallpaper | {1}{8}{1} | – | – | 51 |
*1 If “System setting” column is checked, you do not need to program the same item using another handset.
47