Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message | Cause/solution |
Busy | LThe called handset or base unit is in use. |
| LPrivacy mode is on for the call you tried to join (page |
| 28). |
| LOther units are in use and the system is busy. Try again |
| later. |
|
|
Dial locked | LDial lock is turned on. To turn it off, see page 28. |
Error!! | LThe handset’s registration has failed. Move the handset |
| and base unit away from all electrical appliances and try |
| again. |
| L8 handsets have already been registered to the base |
| unit. A previously deregistered handset number may |
| still be retained in the base unit. To register an |
| additional handset, erase the unnecessary handset |
| number using the base unit: |
| Press and hold {INTERCOM} until the IN USE indicator |
| flashes. iPress and hold the handset’s extension |
| number ({1} – {8}) that you want to cancel/delete from |
| the base unit until a beep sounds. |
| LThe entered password was wrong in programming dial |
| lock. Enter the correct password. |
|
|
Failed | LThe handset you tried to copy phonebook items to is in |
| use. |
| LThe handset you tried to copy phonebook items to is out |
| of area. |
|
|
Incomplete | LThe destination handset’s phonebook memory is full. |
| Erase unnecessary items from the destination |
| handset’s phonebook (page 33). |
|
|
Invalid. | LThe handset is not registered to the base unit. Register |
Please register | the handset (page 65). |
to the base unit |
|
71