Answering System
Erasing your greeting message Press {GREETING CHECK}, and then press {ERASE} while your greeting message is playing.
Prerecorded greeting message
If you erase or do not record your own greeting message, the unit plays a prerecorded greeting message for callers and ask them to leave messages.
If the message recording time (page 60) is set to “Greeting only”, caller messages are not recorded and the unit plays a different prerecorded greeting message asking callers to call again.
Base unit
To play back the
Note:
LIf you changed the caller’s recording time to “Greeting only” to listen to its
Listening to messages using the base unit
When new messages have been recorded, the {MESSAGE} button on the base unit flashes.
Press {MESSAGE}.
LThe unit plays new messages.
LWhen you have no new messages, the unit plays back all messages.
Adjusting the speaker volume
Press {^} or {V} repeatedly while listening to a message.
Repeating a message
Press {<} during playback.
LIf pressed within the first 5 seconds of a message, the previous message is played.
Skipping a message
Press {>} during playback.
Pausing a message
Press {STOP} during playback.
LTo resume playback, press {MESSAGE}.
LTo stop playback completely, press {STOP} again.
Erasing a message
Press {ERASE} during playback.
Erasing all messages
Press {ERASE} 2 times while the unit is not being used.
54