Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message | Cause/solution |
Busy | LThe called handset or base unit is in use. |
| LOther users are using the line(s). Wait until the line |
| status icon goes out. |
| LPrivacy mode is on for the call you tried to join (page |
| 25). |
| LThe handset you tried to copy phonebook items to is in |
| use. |
| LThe handset you are calling is too far from the base unit. |
|
|
Denied | LThe room monitor feature is turned off on the |
| destination handset or base unit and the room cannot |
| be monitored (page 52). |
|
|
Error!! | LThe handset’s registration has failed. Move the handset |
| and base unit away from all electrical appliances and try |
| again. |
| LAnother handset user tried to send phonebook items to |
| you but there was an error. Have the other user |
| the items to you (page 28). |
|
|
Error!! | L8 handsets have already been registered to the base |
All handsets | unit. A previously deregistered handset number may |
registered. | still be retained in the base unit. To register an |
Maximum is 8. | additional handset, erase the unnecessary handset |
| number using the base unit: |
| Press and hold {INTERCOM} until the IN USE indicator |
| flashes. iPress and hold the handset’s extension |
| number ({1} – {8}) that you want to cancel/delete from |
| the base unit until a beep sounds. |
| LThe destination handset’s phonebook memory is full. |
| Erase unnecessary items from the destination |
| handset’s phonebook (page 27). |
| LThe destination handset is out of area. |
| LThe destination handset user may have pressed {C} |
| or {s}. |
|
|
58