Panasonic KX-TG6700AL operating instructions Service difficulties

Page 65

Useful Information

If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased or an Authorised Service Centre.

Service difficulties

If at any time a fault occurs on your telephone service, carry out the following checks before you call for service:

LDisconnect the Permitted Attachment and try using the service with the normal telephone.

LIf the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

LIf when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

WARNING:

This cordless telephone system does not incorporate provision for secrecy of conversations. Appropriately tuned radio equipment and other cordless telephone systems in close proximity may be used by a third party to monitor and possibly interrupt conversations in progress when this system is on radio operation.

65

Image 65

Contents Model No. KX-TG6700AL Programmable settings Using Caller ID service Caller listHandset phonebook Base unit speed diallerThank you for purchasing a Panasonic cordless telephone IntroductionHandset cover comes attached to the handset Accessory informationIncluded accessories Accessory item Order number Additional/replacement accessoriesExpanding your phone system Handset optional KX-TGA670ALSave These Instructions Important safety instructionsLNever install telephone wiring during a lightning storm InstallationLThis equipment will be inoperable when mains power fails MedicalEnvironment For best performanceBase unit location/avoiding noise Routine care Connecting the AC adaptor Setting up the base unitOverview Connect the AC adaptor Connect the telephone line cordTo connect to 2 single-line telephone sockets Connecting the telephone line cordTo single-line sockets Line To connect to a single-line telephone socketNoise filter If you subscribe to an Adsl serviceBattery charge Setting up the handsetBattery installation/replacement Panasonic battery performance Operation Operating time Battery level Battery icon Battery levelBase unit ControlsHandset soft keys Using the navigator keyHandset Handset display items DisplaysBase unit display items Symbol Meaning Symbols used in these operating instructionsSave iOFF HandsetLine selection Setting the unit before useDate and time Making calls Using the handsetStatus Meaning Adjusting the speaker volumeAdjusting the ringer volume Using the base unitAnswering calls Auto talkThis feature allows you to put an outside call on hold Useful features during a callChanging the ringer tone Hold buttonHandset voice enhancer Recall buttonHandset clarity booster Call privacy Using the other line during a callCall share Adding items to the handset phonebook Handset phonebookErasing an item in the handset phonebook Finding and calling a handset phonebook itemEditing items in the handset phonebook Copying handset phonebook items Chain dialCopying an item Copying all itemsAdding phone numbers to the speed dialer Base unit speed diallerCalling someone with the speed dialer To erase a stored phone numberCall waiting and Caller ID compatible Using Caller ID serviceViewing the caller list and calling back Caller listStoring your area code Editing a caller’s phone number before calling backErasing selected caller information Storing caller information into the handset phonebookErasing all caller information Erase iYESSave iOFF Main menu Sub-menu Programmable settingsProgramming by scrolling through the display menus Main menu Sub-menu Feature Feature code Setting code Programming using the direct commands 1064 063 DefaultLine1 0621 3min Line2Line1 0531 2 B Line2 0532 ProgrammingMemory capacity Answering systemTurning the answering system on Screening callsPrerecorded greeting message Recording your greeting messagePlaying back the greeting message Erasing your greeting messagePlaying back messages for the desired lines Pausing a messageRepeating a message Skipping a messageOr V iPLAY LThe messages on the selected lines in are erasedVoice guidance Calling back Caller ID subscribers onlyKey Command Answering system commandsVoice memo Using the answering system remotelyRemote operation Recording a voice memoKey Remote command Remote commandsStop recording Playback.*2OFF For Service Provider Voice Mail Subscribers Answering system settingsRing count Turning on the answering system remotelyMenu Enter the desired 2-digit remote code Caller’s recording timeRemote code Message alert Recording modeMenu i0# Select the desired setting. iSAVE Intercom Press C to answer When you finish taking, press OFFMaking an intercom call Answering an intercom callPress C to answer Transferring callsAnswering transferred calls Conference call with 2 outside calls Conference callsTransferring a call to the answering system Conference call with an outside call and an intercom call Monitoring a room Setting room monitorRoom monitor OFF Registering an additional handset Registering a handsetDeregistering a handset Wall mounting Wall mount template for the base unit To remove the wall-mounting adaptor Headset optional Additional accessoriesBelt clip optional LHeadset shown is KX-TCA86ALDisplay message Cause/solution Error messagesLThere is no handset registered to the base unit LThe handset’s registration may have been cancelledMatching the extension number you entered LYou selected your own extension numberGeneral use Problem Cause/solution TroubleshootingProgrammable settings Problem Cause/solution Battery recharge Problem Cause/solutionMaking/answering calls, intercom Problem Cause/solutionCaller ID Problem Cause/solution Be stored Answering system Problem Cause/solutionCannot leave a message, but the caller information will As shown in Fig Instructions to customerConnect to the Plug Service difficulties Specifications Index Index Page Page Page Manufacturer Sales Department Panasonic Australia Pty. Limited62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright