| Useful Information |
Answering system |
|
|
|
Problem | Cause/solution |
I cannot listen to | LA touch tone phone is required for remote operation. |
messages from a remote | LEnter the remote code correctly (page 43). |
location. | LThe answering system is off. Turn it on (page 45). |
|
|
The unit does not record | LThe answering system is not turned on for the line you |
new messages. | wish to record messages from. Select the desired line |
| or both lines by pressing {LINE SELECT} repeatedly, |
| then turn the answering system on (page 38, 45). |
| LThe recording time is set to “Greeting only”. Select |
| a different setting (page 46). |
| LThe message memory is full. Erase unnecessary |
| messages (page 40). |
| LThe answering system is activated for both lines, and |
| the 1st caller is leaving a voice message. The 2nd caller |
| cannot leave a message, but the caller information will |
| be stored (page 31). |
|
|
I cannot operate the | LSomeone is operating the answering system. |
answering system. | LIf someone is talking on a conference call, you cannot |
| operate the answering system. Try again later. |
|
|
The message indicator | LNew messages have been recorded. Listen to the new |
on the handset slowly | messages (page 40, 41). |
flashes in amber. |
|
|
|
63