Cisco Systems ATA187I1ARF manual Configuring the ATA, Telephony Features Available for the ATA

C H A P T E R 4

Configuring the ATA 187

You must use Cisco Unified Communications Manager Administration to configure telephony features and assign users.

This chapter provides an overview of these configuration and setup procedures. Cisco Unified

Communications Manager documentation provides detailed instructions for these procedures.

Telephony Features Available for the ATA 187

Table 4-1lists the supported telephony features, many of which you configure by using

Cisco Unified Communications Manager Administration.

Table 4-1	Telephony Features for the ATA 187
Feature		Description	Configuration Reference
Audible Message		A stutter tone from the handset, headset, or speakerphone	For more information, refer to:
Waiting Indicator		indicates that a user has one or more new voice messages on	•	Cisco Unified Communications
		a line.
				Manager Administration Guide,
		Note The stutter tone is line-specific. You hear it only		Message Waiting Configuration.
		when using the line with the waiting messages.	•	Cisco Unified Communications
				Manager System Guide, Voice Mail
				Connectivity to Cisco Unified
				Communications Manager.
cBarge		Allows a user to join a non-private call on a shared phone	For more information, refer to:
		line. cBarge adds a user to a call and converts it into a	•	Cisco Unified Communications
		conference, allowing the user and other parties to access
				Manager Administration Guide,
		conference features.
				Cisco Unified IP Phone
		The phones support Barge on a shared conference bridge.		Configuration.
			•	Cisco Unified Communications
				Manager System Guide, Cisco
				Unified IP Phones.
			•	Cisco Unified Communications
				Manager Features and Services
				Guide, Barge and Privacy.

Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)

OL-21862-01 4-1