Trunking Discovery – Monitors system traffic on a trunked radio system to find unknown IDs and automatically records audio from and logs new channels for later review and identification.
Conventional Discovery – Searches a range of frequencies to find unknown frequencies and automatically records audio from and logs new channels for later review and identification.
Scan by Service Types – Scan your channels by Service Type i.e. Fire, Police, Railroad, etc.
Search Speed – 78 step/sec. (typical) in Search mode (max) except for 5 kHz steps. 250 step/ sec. (typical) in Search mode (max) – (Turbo Search) for 5 kHz steps.
Temporary or Permanent Avoid – For Systems/Sites/Departments/Channels.
System/Channel Number Tagging – Number tags allow you to quickly navigate to a specific Favorites List, System, or Channel.
Close Call© RF Capture Technology – Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call
Broadcast Screen – Allows the scanner to ignore hits on known broadcast frequencies including pager frequencies in search and Close Call modes. You can also program up to 10 custom frequency ranges that the scanner will ignore.
Fire
PC Programming – Use the Sentinel software to manage your scanners Profiles, Favorites Lists, Databases, and firmware updates.
Analog and Digital AGC – Helps automatically balance the volume level between different radio systems.
Priority/Priority w/DND Scan – priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions.
Priority ID Scan – Allows you to set priority to talkgroup IDs.
Intermediate Frequency Exchange – Changes the IF used for a selected channel/frequency to help avoid image and other
Individual Channel Volume Offset – Allows you to adjust the volume offset for each channel.
Configurable Band Defaults – Allows you to set the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands.
Repeater Find – Allows the scanner to try to switch to the repeater frequency if an input frequency is found.
Adjustable Scan/Search Delay/Resume – Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search.
Data Naming – Allows you to name each Favorites List, System, Site, Department, Channel, ID, Location, Custom Search, and SAME group, using up to 64 characters.
Duplicate Input Alert – Alerts you if you try to enter a duplicate name or frequency already stored in the scanner.
6