Uniden BCD536HP, BCD436HP owner manual Session Options

Conventional Discovery

Input Session Name - Enter the Name and press E/yes. See Data Naming.

Trunking Discovery

Input System Name - Enter the first few relevant letters of the system and press E/yes. See Data Naming.

Note: The System must be enabled for scan to input system name.

Select System - Scroll to the System and press E/yes.

Select Site - Scroll to the Site and press E/yes.

Input Session Name - Enter the Name and press E/yes. See Data Naming.

Session Options

Press Menu then scroll to Discovery and press E/yes.

Scroll to Trunking/Conventional Discovery and press E/yes.

Scroll to the Discovery Session and press E/yes.

Start Discovery	Set Compare to database
Edit Session Name	Set Record Duration
Set Limit Frequencies	Set Time-Out Timer
Set Modulation	System Information
Set Step	Set Auto Store
Set Delay	Delete Session
Set Logging	Change System

Start Discovery

This starts the Discovery Session.

Press Menu to stop and review the Run information. See Review Discovery. Press Avoid to Avoid a hit.

Press Func then System to exit.

Edit Session Name

This allows you to name a Session.

See Data Naming.

Set Limit Frequencies (Conventional Only)

This sets the lower and upper frequencies for conventional discovery session. Set Lower Limit Enter the lower limit.

Set Upper Limit Enter the upper limit.

Set Modulation (Conventional Only)

This sets the modulation for conventional discovery session.

Auto, AM, FM, NFM, WFM, or FMB (FM Broadcast)

Set Step (Conventional Only)

This sets the step size for conventional discovery session.

Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz

61