Uniden BCD436HP, BCD536HP Edit Name Set Modulation, Set Site Type Set Attenuator, Band Plan

Page 50

Edit Name

Set Modulation

P25 Threshold Mode

Set Site Type

Set Attenuator

P25 Threshold Level

Edit Band Plan

Set Avoid

Delete Site

Set Frequencies

Set Location Information

New Site

 

P25 Waiting Time

 

Edit Name

See Data Naming.

Set Site Type (EDACS Only) – EDACS Wide is the same as EDACS Standard and use a 9600 baud control channel. EDACS Narrow-band sites use a 4800 baud control channel.

Wide (Standard) or Narrow. The default setting is Wide.

Edit Band Plan (Motorola/P25 Only) – Band plans are required so the scanner can correctly determine the voice channel frequencies.

P25 Systems. Explicit mode systems (which comprise most systems in use) include all information needed to determine voice frequencies on the control channel, leave all entries blank. The system will automatically detect the band plan and fill in the entries. Implicit systems need you to supply the systems band plan with the Custom option for the scanner to correctly determine voice frequencies.

Select Plan - Scroll to each Band Plan 0-9,A-F, and press E/yes.

Input Base Freq - Enter the base frequency press E/yes.

Input Spacing - Enter the step size and press E/yes.

Press Menu to return and repeat for each band plan as needed.

Motorola Systems

800/900 Standard or 800 Splinter

The scanner will use the regular Motorola band plan.

Custom (rebanded) Motorola/VHF/UHF Systems. Custom band plans require that you enter both a lower and an upper base frequency value. The lower base frequency (or base) is always the base frequency as provided in the Radio Reference Database.

Use this Excel spreadsheet to calculate the upper base frequency value located at: http://info.uniden.com/twiki/pub/UnidenMan4/CalculatingUpperBaseFrequencies/ CustomBandPlanCalculator.xls

If you don’t have Excel you can download and install a viewer here, or do a simple Google search.

The upper base frequency can also be found using the Band Plan Calculator located at: http://info.uniden.com/twiki/bin/view/UnidenMan4/CalculatingUpperBaseFrequencies.

Also, look at Determining Base/Step/Offset for VHF/UHF Motorola Systems at Radio Reference.com.

For Standard 800 MHz Rebanded Systems, you need to set Band Plan 1 and Band Plan 2 as follows:

Band Plan

Lower Base Freq

Upper Base Freq

Offset

Polarity

Spacing

1

851..025

854..000

440

+

25 kHz

 

 

 

 

 

 

2

851..0125

868..9875

0

+

25 kHz

 

 

 

 

 

 

Select Plan 1-6Select for each Band Plan.

42

Image 50
Contents BCD436HP BCD536HP Page Contents Set Your Location and Range Programming Departments Search/Close Call Options Page Fire Tone-Out Modification Notice Important InformationFCC Wants You to Know Part 15 InformationScanning Legally General PrecautionsPower Disconnection Caution Earphone WarningAvis D’INDUSTRIE Canada What You Hear IntroductionHow Does the Home Patrol Work? Create Favorites ListsRecord Transmissions Main FeaturesReplay Transmissions Page Page Included With Your Scanner BCD436HP BCD536HPConnecting an Optional Antenna Installing Your ScannerPower Related Issues Connecting an Extension SpeakerBase Station Vehicle Installation Mounting Using the BracketMounting Using the DIN-E Sleeve Removing the Scanner from the DIN-E Sleeve Connecting DC Cable with Orange Wire Using Internal Batteries BCD436HP OnlyMounting Using ISO Technique Favorites Lists Using Rechargeable BatteriesUnderstanding the Memory Sentinel Software Updating Firmware Manage Firmware UpdatesHow to Install Sentinel Software Updating the DatabaseSetting UP Your Scanner For Model Number ProcedureKeypad and Knob Controls Key OperationBCD436HP Turn to scroll Channel or Frequency in Hold mode Common Controls BCD436HP and BCD536HP No/PRI YesSet Range Set Your Location and RangeSet Location Understanding RangeNew Location or Edit Location Selecting Service TypesEdit Location Set Location Information. See Set Manual LocationData Naming Set Mode SquelchNavigating the Menus Display MenuContrast On or Off Selecting 3-Line Display ModeSet Dimmer BCD436HP Only High, Middle, or Low On or OffLook at the Display View the Battery Level BCD436HP OnlySearching Volume and Squelch IFX Tgid Settings Menu Replay Options Wi-Fi Setup BCD536HP OnlyRestore Options See Scanner InformationFavorites List Quick Keys Wi-Fi OptionsQuick Keys Managing Favorites Lists Review/Edit System At Confirm? Press E/yes or ./noManaging Favorites Lists New System/System SettingsProgramming Systems Understanding Location ControlSystem Settings System Options On or Off At Confirm?, press E/yes or ./no Programming SitesNew Site/Site Options Motorola Systems 800/900 Standard or 800 Splinter Edit Name Set ModulationSet Site Type Set Attenuator Band PlanDelete Frequency At Confirm Delete?, press E/yes or ./no Set Base FreqSet Offset Auto, NFM, or FMProgramming Departments New Department/Department OptionsEdit Channel Set Avoid Department OptionsEdit Name Set Location Information Edit ChannelNew Channel/Channel Options Programming Frequencies/TGIDsQuickly Storing a Frequency/TGID Channel OptionsSet Modulation New Channel Edit Name Set Audio Type Set Delay TimeSet Number Tag Set Priority Edit Frequency or Tgid999, Blank No number tag Favorites Quick Key Set Scan SelectionManaging Full Database System Quick KeyTo Use a Startup Key Using Startup KeysPriority Scanning Priority Scan Options100 Scanning by Assigning Quick Keys10 sec Scanning Checklist Change Direction or Resume Scan Turn the Scroll ControlLine Display O Selecting Quick KeysToggle Display Modes Holding Select Service TypesLine Display On Toggle ID Scan or ID Search Replay the Last TransmissionsStore a Search Frequency Search with Scan Start/Stop RecordingAdvanced Channel Menu AttenuationRepeater Frequency Conventional Channel Channel Volume OffsetIntermediate Frequency Exchange Avoiding Channels, Departments, Sites, and SystemsClose Call Modes Using Number TagsDirect Frequency/TGID Entry View Number TagsClose Call Only Priority ModesCustom Search by Search Key Weather ScanQuick Search Using a GPSP25 Adjustment Mode Location-Based ScanningDiscovery Mode New SessionSession Options Set Logging Set DelaySet Time-Out Timer Set Compare to DatabaseReview Discovery Search/Close Call OptionsProgram Band At Confirm? Press E/yes or ./no Rvw Search AvoidSet Each Band 10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 secSearch Options Edit CustomSet System Avoid Set Search KeySearch with Scan Custom Search Frequency Intermediate Exchange Weather Alert Priority ModeDirect Frequency Entry Repeater FrequencyClose Call Only Close CallClose Call Options Hits with ScanSet CC Bands Set CC ModeClose Call Only Mode Set CC AlertHolding on a Hit Cancel a HitToggle Close Call Bands View Last HitIntermediate Frequency Exchange Weather OperationWeather Options StoringSet Audio AGC Set Delay TimeSet Attenuator Program SameChange Channel Weather AlertWeather Scan Quick SearchReview WX Alerts Tone-Out SetupFire Tone-Out Set Tone Edit NameSet Frequency Set AlertListen to Tone-Out Frequency Fire Tone-Out Standby/SearchSelect a Different Tone-Out Scroll to Tone-Out Standby and press E/yesScan Mode, Nothing to Scan TroubleshootingAppendix Scanning InterruptedDefault Band Coverage Frequency Range Mode Step Band Lower Upper KHzService Types Service Type DescriptionReformatting the microSD Card Removing the microSD CardEntering IDs System Type Tgid FormatType II Special Status Bits TT ID + # UsageWeather Channels Event Code Watch Advisory Definition?NIC Ctcss Frequencies Base Frequency Offset MHz DCS CodesReverse List Repeater Frequency List Technical Specifications BCD436HP VHF High 1 Band Technical Specifications BCD536HP 138..150 MHz 48dB Warranty Information Page