Access Point Mode is able to connect with up to 5 clients.
Setting parameters are as follows: SSID, Security type, and Password.
Wi-Fi OPTIONS
Make sure the
Show Wi-Fi Information
Shows the IP address, MAC number, and version when connected.
Shows
Set Connection
Off. Not connected.
Infrastructure Mode. Routers etc.
Select AP. Select the access point with the encryption type.
Input Password. Input password to connect.
Access Point Mode. Laptops, Smart devices etc.
Input SSID
Enter (or use default) name of connection. See Data Naming.
Select Security
Open, WPA/WPA2
Input Password. Enter the password for connection.
Reset to Factory
Initialize information for WiFi Setup.
KEY CONCEPTS
Quick Keys
Organizing your Quick Keys will be part of the planning. You will have to figure out which quick keys to assign to your Favorites Lists and Systems so you can scan them without a table of contents and with some sort of logic you can remember. Remember, enabling/disabling quick keys is not the same thing as Avoiding or Unavoiding Systems and Monitor On/Off Favorites Lists.
Favorites List Quick Keys
Favorites Lists Quick Keys are used to enable or disable Favorites Lists for scanning. They are just the number keys on the scanner but once assigned to a Favorites List they become the Quick Keys. Your Favorites Lists hold your Systems that also may have System quick keys assigned to those Systems. You cannot assign a Quick Key in one Favorites List to another Favorites List. Selecting a Favorites List will enable all (Unavoided) Systems in that list for scanning. There
are 100 Quick Keys
34