Uniden BCD436HP, BCD536HP owner manual Set Search Key, Search with Scan, Set System Avoid

Page 74

Set Avoid

Stop Avoiding, Temporary Avoid, or Permanent Avoid

Set Hold Time. Sets how long to search when scanning.

Enter the hold time (0-255 sec.) and press E/yes to save.

Set Search Key

The scanner has three search keys that you can assign to a search range. The search keys are number keys 1, 2, and 3. This allows you to start a Custom, Tone-Out, or Close Call Search without having to go into the menus.

Search Key 1-3.Select a search for each Search Key.

.(nothing assigned), Custom Search 0-9, Tone-Out, or Close Call.

Search with Scan

This enables Custom Searches in Scan mode.

See also Select Lists to Monitor and Edit Custom Search.

Set System Avoid

Stop Avoiding, Temporary, or Permenant Avoid.

Quick Search

Allows you to start searching at the displayed frequency, or enter a frequency and start searching from that frequency in hold modes.

Quick Search will search all the way up to 1300 MHz or all the way down to 25 MHz then start over.

To Start a Quick Search from the Displayed Frequency:

Press Channel to hold on the channel or frequency.

Press Func then E/yes. At Quick Search? Press E/yes.

Press Channel again to release hold mode and start searching.

To Start a Quick Search from a New Frequency:

Press Channel to hold on any channel or frequency.

Enter the new frequency then press Channel to set the new starting frequency. Press Channel again to release hold mode and start searching.

Press Channel to hold on any channel or frequency. Enter the new frequency you wish to start at then press Channel to set the new starting frequency. Press Channel again to release hold mode and start searching.

66

Image 74

Contents BCD436HP BCD536HP Page Contents Set Your Location and Range Programming Departments Search/Close Call Options Page Fire Tone-Out Modification Notice Important InformationFCC Wants You to Know Part 15 InformationScanning Legally General PrecautionsPower Disconnection Caution Earphone WarningAvis D’INDUSTRIE Canada What You Hear IntroductionHow Does the Home Patrol Work? Create Favorites ListsRecord Transmissions Main FeaturesReplay Transmissions Page Page Included With Your Scanner BCD436HP BCD536HPConnecting an Optional Antenna Installing Your ScannerPower Related Issues Connecting an Extension SpeakerBase Station Vehicle Installation Mounting Using the BracketMounting Using the DIN-E Sleeve Removing the Scanner from the DIN-E Sleeve Connecting DC Cable with Orange Wire Using Internal Batteries BCD436HP OnlyMounting Using ISO Technique Favorites Lists Using Rechargeable BatteriesUnderstanding the Memory Sentinel Software Updating Firmware Manage Firmware UpdatesHow to Install Sentinel Software Updating the DatabaseSetting UP Your Scanner For Model Number ProcedureKeypad and Knob Controls Key OperationBCD436HP Turn to scroll Channel or Frequency in Hold mode Common Controls BCD436HP and BCD536HP No/PRI YesSet Range Set Your Location and RangeSet Location Understanding RangeNew Location or Edit Location Selecting Service TypesEdit Location Set Location Information. See Set Manual LocationData Naming Set Mode SquelchNavigating the Menus Display MenuContrast On or Off Selecting 3-Line Display ModeSet Dimmer BCD436HP Only High, Middle, or Low On or OffLook at the Display View the Battery Level BCD436HP OnlySearching Volume and Squelch IFX Tgid Settings Menu Replay Options Wi-Fi Setup BCD536HP OnlyRestore Options See Scanner InformationFavorites List Quick Keys Wi-Fi OptionsQuick Keys Managing Favorites Lists Review/Edit System At Confirm? Press E/yes or ./noManaging Favorites Lists New System/System SettingsProgramming Systems Understanding Location ControlSystem Settings System Options On or Off At Confirm?, press E/yes or ./no Programming SitesNew Site/Site Options Motorola Systems 800/900 Standard or 800 Splinter Edit Name Set ModulationSet Site Type Set Attenuator Band PlanDelete Frequency At Confirm Delete?, press E/yes or ./no Set Base FreqSet Offset Auto, NFM, or FMProgramming Departments New Department/Department OptionsEdit Channel Set Avoid Department OptionsEdit Name Set Location Information Edit ChannelNew Channel/Channel Options Programming Frequencies/TGIDsQuickly Storing a Frequency/TGID Channel OptionsSet Modulation New Channel Edit Name Set Audio Type Set Delay TimeSet Number Tag Set Priority Edit Frequency or Tgid999, Blank No number tag Favorites Quick Key Set Scan SelectionManaging Full Database System Quick KeyTo Use a Startup Key Using Startup KeysPriority Scanning Priority Scan Options100 Scanning by Assigning Quick Keys10 sec Scanning Checklist Change Direction or Resume Scan Turn the Scroll ControlLine Display O Selecting Quick KeysToggle Display Modes Holding Select Service TypesLine Display On Toggle ID Scan or ID Search Replay the Last TransmissionsStore a Search Frequency Search with Scan Start/Stop RecordingAdvanced Channel Menu AttenuationRepeater Frequency Conventional Channel Channel Volume OffsetIntermediate Frequency Exchange Avoiding Channels, Departments, Sites, and SystemsClose Call Modes Using Number TagsDirect Frequency/TGID Entry View Number TagsClose Call Only Priority ModesCustom Search by Search Key Weather ScanQuick Search Using a GPSP25 Adjustment Mode Location-Based ScanningDiscovery Mode New SessionSession Options Set Logging Set DelaySet Time-Out Timer Set Compare to DatabaseReview Discovery Search/Close Call OptionsProgram Band At Confirm? Press E/yes or ./no Rvw Search AvoidSet Each Band 10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 secSearch Options Edit CustomSet System Avoid Set Search KeySearch with Scan Custom Search Frequency Intermediate Exchange Weather Alert Priority ModeDirect Frequency Entry Repeater FrequencyClose Call Only Close CallClose Call Options Hits with ScanSet CC Bands Set CC ModeClose Call Only Mode Set CC AlertHolding on a Hit Cancel a HitToggle Close Call Bands View Last HitIntermediate Frequency Exchange Weather OperationWeather Options StoringSet Audio AGC Set Delay TimeSet Attenuator Program SameChange Channel Weather AlertWeather Scan Quick SearchReview WX Alerts Tone-Out SetupFire Tone-Out Set Tone Edit NameSet Frequency Set AlertListen to Tone-Out Frequency Fire Tone-Out Standby/SearchSelect a Different Tone-Out Scroll to Tone-Out Standby and press E/yesScan Mode, Nothing to Scan TroubleshootingAppendix Scanning InterruptedDefault Band Coverage Frequency Range Mode Step Band Lower Upper KHzService Types Service Type DescriptionReformatting the microSD Card Removing the microSD CardEntering IDs System Type Tgid FormatType II Special Status Bits TT ID + # UsageWeather Channels Event Code Watch Advisory Definition?NIC Ctcss Frequencies Base Frequency Offset MHz DCS CodesReverse List Repeater Frequency List Technical Specifications BCD436HP VHF High 1 Band Technical Specifications BCD536HP 138..150 MHz 48dB Warranty Information Page