Uniden BCD536HP, BCD436HP Important Information, FCC Wants You to Know, Modification Notice

Page 9

Important Information

The FCC Wants You to Know

IMPORTANT! This scanning radio has been manufactured so that it will not tune to the radio frequencies assigned by the FCC for cellular telephone usage. The Electronic Communications Privacy Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or cordless telephone transmissions or to market this radio when altered to receive them. The installation, possession, or use of this scanning radio in a motor vehicle may be prohibited, regulated, or require a permit in certain states, cities, and/or local jurisdictions. Your local law enforcement officials should be able to provide you with information regarding the laws in your community.

Caution - FCC RF Exposure Requirements

Transmitter operating conditions: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7.8 in. (20 cm) from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter

Modification Notice

Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Users Guide, could void your authority to operate this product.

Part 15 Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents BCD436HP BCD536HP Page Contents Set Your Location and Range Programming Departments Search/Close Call Options Page Fire Tone-Out FCC Wants You to Know Important InformationModification Notice Part 15 InformationPower Disconnection Caution General PrecautionsScanning Legally Earphone WarningAvis D’INDUSTRIE Canada How Does the Home Patrol Work? IntroductionWhat You Hear Create Favorites ListsMain Features Replay TransmissionsRecord Transmissions Page Page BCD436HP BCD536HP Included With Your ScannerPower Related Issues Installing Your ScannerConnecting an Optional Antenna Connecting an Extension SpeakerBase Station Mounting Using the Bracket Vehicle InstallationMounting Using the DIN-E Sleeve Removing the Scanner from the DIN-E Sleeve Using Internal Batteries BCD436HP Only Mounting Using ISO TechniqueConnecting DC Cable with Orange Wire Using Rechargeable Batteries Understanding the MemoryFavorites Lists Sentinel Software How to Install Sentinel Software Manage Firmware UpdatesUpdating Firmware Updating the DatabaseFor Model Number Procedure Setting UP Your ScannerKey Operation Keypad and Knob ControlsBCD436HP Turn to scroll Channel or Frequency in Hold mode Common Controls BCD436HP and BCD536HP Yes No/PRISet Location Set Your Location and RangeSet Range Understanding RangeEdit Location Selecting Service TypesNew Location or Edit Location Set Location Information. See Set Manual LocationNavigating the Menus Set Mode SquelchData Naming Display MenuSet Dimmer BCD436HP Only High, Middle, or Low On or Off Selecting 3-Line Display ModeContrast On or OffView the Battery Level BCD436HP Only SearchingLook at the Display Volume and Squelch IFX Tgid Settings Menu Restore Options Wi-Fi Setup BCD536HP OnlyReplay Options See Scanner InformationWi-Fi Options Quick KeysFavorites List Quick Keys Managing Favorites Lists At Confirm? Press E/yes or ./no Review/Edit SystemProgramming Systems New System/System SettingsManaging Favorites Lists Understanding Location ControlSystem Settings System Options On or Off Programming Sites New Site/Site OptionsAt Confirm?, press E/yes or ./no Set Site Type Set Attenuator Edit Name Set ModulationMotorola Systems 800/900 Standard or 800 Splinter Band PlanSet Offset Set Base FreqDelete Frequency At Confirm Delete?, press E/yes or ./no Auto, NFM, or FMNew Department/Department Options Programming DepartmentsEdit Name Set Location Information Department OptionsEdit Channel Set Avoid Edit ChannelQuickly Storing a Frequency/TGID Programming Frequencies/TGIDsNew Channel/Channel Options Channel OptionsSet Number Tag Set Priority Set Audio Type Set Delay TimeSet Modulation New Channel Edit Name Edit Frequency or Tgid999, Blank No number tag Managing Full Database Set Scan SelectionFavorites Quick Key System Quick KeyPriority Scanning Using Startup KeysTo Use a Startup Key Priority Scan OptionsScanning by Assigning Quick Keys 10 sec100 Change Direction or Resume Scan Turn the Scroll Control Scanning ChecklistSelecting Quick Keys Toggle Display ModesLine Display O Line Display On Toggle ID Scan or ID Search Select Service TypesHolding Replay the Last TransmissionsAdvanced Channel Menu Start/Stop RecordingStore a Search Frequency Search with Scan AttenuationIntermediate Frequency Exchange Channel Volume OffsetRepeater Frequency Conventional Channel Avoiding Channels, Departments, Sites, and SystemsDirect Frequency/TGID Entry Using Number TagsClose Call Modes View Number TagsCustom Search by Search Key Priority ModesClose Call Only Weather ScanP25 Adjustment Mode Using a GPSQuick Search Location-Based ScanningNew Session Discovery ModeSession Options Set Time-Out Timer Set DelaySet Logging Set Compare to DatabaseSearch/Close Call Options Review DiscoverySet Each Band At Confirm? Press E/yes or ./no Rvw Search AvoidProgram Band 10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 secEdit Custom Search OptionsSet Search Key Search with ScanSet System Avoid Custom Search Direct Frequency Entry Weather Alert Priority ModeFrequency Intermediate Exchange Repeater FrequencyClose Call Options Close CallClose Call Only Hits with ScanClose Call Only Mode Set CC ModeSet CC Bands Set CC AlertToggle Close Call Bands Cancel a HitHolding on a Hit View Last HitWeather Options Weather OperationIntermediate Frequency Exchange StoringSet Attenuator Set Delay TimeSet Audio AGC Program SameWeather Scan Weather AlertChange Channel Quick SearchTone-Out Setup Fire Tone-OutReview WX Alerts Set Frequency Edit NameSet Tone Set AlertSelect a Different Tone-Out Fire Tone-Out Standby/SearchListen to Tone-Out Frequency Scroll to Tone-Out Standby and press E/yesAppendix TroubleshootingScan Mode, Nothing to Scan Scanning InterruptedFrequency Range Mode Step Band Lower Upper KHz Default Band CoverageService Type Description Service TypesEntering IDs Removing the microSD CardReformatting the microSD Card System Type Tgid FormatTT ID + # Usage Type II Special Status BitsEvent Code Watch Advisory Definition? Weather ChannelsNIC Ctcss Frequencies DCS Codes Reverse ListBase Frequency Offset MHz Repeater Frequency List Technical Specifications BCD436HP VHF High 1 Band Technical Specifications BCD536HP 138..150 MHz 48dB Warranty Information Page
Top Page Image Contents