Uniden BCD536HP Using Internal Batteries BCD436HP Only, Mounting Using ISO Technique

Page 22

Mounting Using ISO Technique

Some vehicles can take advantage of another approach to mounting a radio in a vehicle, called the ISO technique. However, this technique requires a very detailed and thorough knowledge of the technique. Therefore, we strongly suggest that if you have any doubt about your experience and abilities, please consult with a professional installer who is familiar with the ISO approach to radio installation.

To begin the process, it is first necessary to remove the scanners outer metal sleeve from the inner chassis. Unthread the four screws in the rear of the unit. Slide the cover toward the rear and off. Once the sleeve is removed, you will see threaded, metric machine screw holes on either side of the chassis cabinet. Uniden does not supply these screws. Their diameter, length, and screw type should be chosen by a qualified installer based on the internal vehicle bracket which will be used in securing the scanner chassis.

Once the original radio is removed from the vehicle dash and the fit of the scanner is correct, be sure to connect all the power, audio, antenna, and any other cables or wires, to the scanner before the scanner is secured.

The following illustration is a typical example of the ISO technique and the general side mounting screw holes often encountered. It does not actually represent the Uniden scanner or your vehicle’s mounting bracket. Only a professional installer will be able to determine the best and correct approach.

Connecting DC Cable with Orange Wire

Connect this cable to the vehicle’s electric system that receives power when you turn on your headlights. Now your scanner’s display will automatically dim when you turn on the headlights.

Using Internal Batteries (BCD436HP Only)

You can power your scanner using three alkaline or rechargeable AA batteries.

There is no switch for the battery type. Using non-rechargeable batteries, select “No” at the Battery message when connecting the USB cable.

1.Install 3 AA batteries, matching the polarity symbols (+ -).

2.Replace the cover.

When Battery icon flashes and the scanner beeps every 15 seconds, replace or recharge the batteries.

14

Image 22

Contents BCD436HP BCD536HP Page Contents Set Your Location and Range Programming Departments Search/Close Call Options Page Fire Tone-Out Modification Notice Important InformationFCC Wants You to Know Part 15 InformationScanning Legally General PrecautionsPower Disconnection Caution Earphone WarningAvis D’INDUSTRIE Canada What You Hear IntroductionHow Does the Home Patrol Work? Create Favorites ListsReplay Transmissions Main FeaturesRecord Transmissions Page Page Included With Your Scanner BCD436HP BCD536HPConnecting an Optional Antenna Installing Your ScannerPower Related Issues Connecting an Extension SpeakerBase Station Vehicle Installation Mounting Using the BracketMounting Using the DIN-E Sleeve Removing the Scanner from the DIN-E Sleeve Mounting Using ISO Technique Using Internal Batteries BCD436HP OnlyConnecting DC Cable with Orange Wire Understanding the Memory Using Rechargeable BatteriesFavorites Lists Sentinel Software Updating Firmware Manage Firmware UpdatesHow to Install Sentinel Software Updating the DatabaseSetting UP Your Scanner For Model Number ProcedureKeypad and Knob Controls Key OperationBCD436HP Turn to scroll Channel or Frequency in Hold mode Common Controls BCD436HP and BCD536HP No/PRI YesSet Range Set Your Location and RangeSet Location Understanding RangeNew Location or Edit Location Selecting Service TypesEdit Location Set Location Information. See Set Manual LocationData Naming Set Mode SquelchNavigating the Menus Display MenuContrast On or Off Selecting 3-Line Display ModeSet Dimmer BCD436HP Only High, Middle, or Low On or OffSearching View the Battery Level BCD436HP OnlyLook at the Display Volume and Squelch IFX Tgid Settings Menu Replay Options Wi-Fi Setup BCD536HP OnlyRestore Options See Scanner InformationQuick Keys Wi-Fi OptionsFavorites List Quick Keys Managing Favorites Lists Review/Edit System At Confirm? Press E/yes or ./noManaging Favorites Lists New System/System SettingsProgramming Systems Understanding Location ControlSystem Settings System Options On or Off New Site/Site Options Programming SitesAt Confirm?, press E/yes or ./no Motorola Systems 800/900 Standard or 800 Splinter Edit Name Set ModulationSet Site Type Set Attenuator Band PlanDelete Frequency At Confirm Delete?, press E/yes or ./no Set Base FreqSet Offset Auto, NFM, or FMProgramming Departments New Department/Department OptionsEdit Channel Set Avoid Department OptionsEdit Name Set Location Information Edit ChannelNew Channel/Channel Options Programming Frequencies/TGIDsQuickly Storing a Frequency/TGID Channel OptionsSet Modulation New Channel Edit Name Set Audio Type Set Delay TimeSet Number Tag Set Priority Edit Frequency or Tgid999, Blank No number tag Favorites Quick Key Set Scan SelectionManaging Full Database System Quick KeyTo Use a Startup Key Using Startup KeysPriority Scanning Priority Scan Options10 sec Scanning by Assigning Quick Keys100 Scanning Checklist Change Direction or Resume Scan Turn the Scroll ControlToggle Display Modes Selecting Quick KeysLine Display O Holding Select Service TypesLine Display On Toggle ID Scan or ID Search Replay the Last TransmissionsStore a Search Frequency Search with Scan Start/Stop RecordingAdvanced Channel Menu AttenuationRepeater Frequency Conventional Channel Channel Volume OffsetIntermediate Frequency Exchange Avoiding Channels, Departments, Sites, and SystemsClose Call Modes Using Number TagsDirect Frequency/TGID Entry View Number TagsClose Call Only Priority ModesCustom Search by Search Key Weather ScanQuick Search Using a GPSP25 Adjustment Mode Location-Based ScanningDiscovery Mode New SessionSession Options Set Logging Set DelaySet Time-Out Timer Set Compare to DatabaseReview Discovery Search/Close Call OptionsProgram Band At Confirm? Press E/yes or ./no Rvw Search AvoidSet Each Band 10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 secSearch Options Edit CustomSearch with Scan Set Search KeySet System Avoid Custom Search Frequency Intermediate Exchange Weather Alert Priority ModeDirect Frequency Entry Repeater FrequencyClose Call Only Close CallClose Call Options Hits with ScanSet CC Bands Set CC ModeClose Call Only Mode Set CC AlertHolding on a Hit Cancel a HitToggle Close Call Bands View Last HitIntermediate Frequency Exchange Weather OperationWeather Options StoringSet Audio AGC Set Delay TimeSet Attenuator Program SameChange Channel Weather AlertWeather Scan Quick SearchFire Tone-Out Tone-Out SetupReview WX Alerts Set Tone Edit NameSet Frequency Set AlertListen to Tone-Out Frequency Fire Tone-Out Standby/SearchSelect a Different Tone-Out Scroll to Tone-Out Standby and press E/yesScan Mode, Nothing to Scan TroubleshootingAppendix Scanning InterruptedDefault Band Coverage Frequency Range Mode Step Band Lower Upper KHzService Types Service Type DescriptionReformatting the microSD Card Removing the microSD CardEntering IDs System Type Tgid FormatType II Special Status Bits TT ID + # UsageWeather Channels Event Code Watch Advisory Definition?NIC Ctcss Frequencies Reverse List DCS CodesBase Frequency Offset MHz Repeater Frequency List Technical Specifications BCD436HP VHF High 1 Band Technical Specifications BCD536HP 138..150 MHz 48dB Warranty Information Page