Uniden DGA940 manual Integrated Answering Device, Message counter LED turns off

Page 27

SETTING UP THE INTEGRATED ANSWERING DEVICE

THE INTEGRATED ANSWERING DEVICE

The DGA940 has a built-in answering system to answer and record your incoming calls. You can use your answering system to leave a memo message for others who use the phone, or to answer the phone with your personalised message when you are away.

FEATURES

●Digital Tapeless Recording

●15 minutes Recording Time

●Call Screening

●Selectable Outgoing Messages

●Time and Day Stamp

●Remote Access

●Toll Saver

Digital Tapeless Recording allows you to quickly review, save, or delete messages. You’ll never worry about a tape wearing out, jamming, or resetting improperly. The Integrated Answering System is easy and convenient to use. However, please read all instructions carefully before using your answering system.

TURNING THE ANSWERING SYSTEM ON/OFF

1. To turn the answering system on, press answer. A tone sounds. An outgoing message plays on the base speaker. A second tone sounds after the message plays. The message counter LED turns on to indicate the unit is ready to answer calls.

2.To turn the answering system off, press answer again. A tone sounds followed by the announcement “Answer off”.

The message counter LED turns off.

24

Image 27

Contents Page Functions Repeat Beltclip Holder Arging Contacts Contents Before you read anything else, please observe the following PrecautionsPrecaution Do not short-circuit the batteryPrecautions Important Safety InstructionsImportant Electrical Considerations Additional Battery Safety PrecautionsTelephone Line Problems Features IntroductionWelcome Included in Your Package Installation Considerations InstallingSet the base on a desk or tabletop with DESK/TABLETOP InstallationStandard wall plate mounting Wall InstallationDirect wall mounting Be careful not to insert the mounting screws Installation & Adjusting Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery pack With normal usage, your battery should last about one year Cleaning the Battery ContactsSetting the PULSE/TONE Switch Low battery indicatorBase ringer volume Adjusting Ringer ToneHandset ringer volume Handset earpiece volumeTo remove the beltclip Installing the BeltclipTo attach the beltclip Remove the slot coverAutomatic Digital Code Security Headset InstallationRestore power to the base To reset the digital security codeUsing Making and Receiving CallsBasic phone operation Flash and Call Waiting If you are dialing in the pulse modeIf you have Call Waiting service and a ToneOne touch memory dialing Using the memory location featuresDialing a Number in Memory Remove the handset from the basePabx Connection Dial the party or service main numberChain Dialing Travelling OUT-OF-RANGEMessage counter LED turns off Integrated Answering DevicePress skip or repeat Setting the ClockYour message plays back for your review Preset messageFollowing message is pre-recorded Press and hold ogm until you hearSelecting the Message Time Setting the Ring TimeTo select a PIN Selecting a PIN CodeRepeating a Message Playing Your MessagesDeleting a Message Skipping a MessageSystem returns to Standby Using the Reset ButtonReset button is used to initialise the base computer Recording a Voice MemoRemote Access Away from Home Remote Switch OnRemote Room Monitor Function Press Other FunctionsQuick Reference Chart TroubleshootingFour minute option System does not Handset SpecificationsGeneral Base UnitWarranty Warranty1800 632 Uniden Australia Pty Limited Part Code UCZZ01655BZ