Uniden DGA940 manual Four minute option System does not

PROBLEM		SUGGESTION
The answering	●	Make sure the base unit is plugged in.
		Make sure the answering system is turned on.
system does not	●
		Press RESET after an AC line spike.
work.	●
The answering	●	Set the REC TIME switch to either the one minute or
		four minute option.
system does not
		The memory may be full. Delete some or all of the saved
answer calls.	●
		messages.
	●	The incoming messages may be too long. Remind callers
Messages are		to leave a brief message.
incomplete	●	The memory may be full. Delete some or all of the saved
		messages.
After a power	●	Record your personal outgoing message again.
failure, the		The default message should remain.
outgoing message
is deleted.
No sound on the	●	Adjust the speaker volume on the base unit.
base unit speaker
during call
monitoring or			TROUBLESHOOTING
message playback
Cannot access	●	Make sure you’re using the correct PIN.
remote call-in	•	Make sure that the touch-tone phone you’re using can
features from		transmit the tone for at least two seconds. If it cannot, you
another touch-		may have to use another phone to access your messages.
tone phone.

35