Uniden DGA940 manual Tone, Flash and Call Waiting, Mute, If you are dialing in the pulse mode

Page 24

The tone feature applies only when the base is set to pulse.

The flash + 2 procedure toggles between the incoming and original call (vice versa). The flash + 1 procedure will drop the current call and pick up the incoming call or call on hold.

TONE

If you are dialing in the pulse mode

and need to enter tone digits, press ✱ then enter the digits. Once the call has ended, tone mode is cancelled and pulse dialing resumes.

FLASH AND CALL WAITING

If you have Call Waiting service and a

call waiting tone sounds, press flash then 2 to accept the call. After a short pause you will hear the new caller. To return to the original caller, press flash then 1.

PAGE

To locate the handset when it is off the base, press page on the base. The handset beeps for about 15 seconds.

Press talk on the handset twice to stop the beeping.

MUTE

To use the mute feature during a conversation, press mute. The other party will not be able to hear you although you can hear them. To disable the mute feature, press mute again.

	USING YOUR
21	PHONE
21

Image 24

Contents Page Functions Repeat Beltclip Holder Arging Contacts Contents Precautions PrecautionDo not short-circuit the battery Before you read anything else, please observe the followingImportant Safety Instructions PrecautionsAdditional Battery Safety Precautions Important Electrical ConsiderationsTelephone Line Problems Features IntroductionWelcome Included in Your Package Installing Installation ConsiderationsDESK/TABLETOP Installation Set the base on a desk or tabletop withWall Installation Standard wall plate mountingDirect wall mounting Be careful not to insert the mounting screws Installation & Adjusting Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery pack Cleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator With normal usage, your battery should last about one yearAdjusting Ringer Tone Handset ringer volumeHandset earpiece volume Base ringer volumeInstalling the Beltclip To attach the beltclipRemove the slot cover To remove the beltclipHeadset Installation Restore power to the baseTo reset the digital security code Automatic Digital Code SecurityUsing Making and Receiving CallsBasic phone operation If you are dialing in the pulse mode If you have Call Waiting service and aTone Flash and Call WaitingUsing the memory location features Dialing a Number in MemoryRemove the handset from the base One touch memory dialingDial the party or service main number Chain DialingTravelling OUT-OF-RANGE Pabx ConnectionIntegrated Answering Device Message counter LED turns offSetting the Clock Press skip or repeatPreset message Following message is pre-recordedPress and hold ogm until you hear Your message plays back for your reviewSetting the Ring Time Selecting the Message TimeSelecting a PIN Code To select a PINPlaying Your Messages Repeating a MessageSkipping a Message Deleting a MessageUsing the Reset Button Reset button is used to initialise the base computerRecording a Voice Memo System returns to StandbyRemote Access Away from Home Remote Switch OnRemote Room Monitor Other Functions Function PressTroubleshooting Quick Reference ChartFour minute option System does not Specifications GeneralBase Unit HandsetWarranty Warranty1800 632 Uniden Australia Pty Limited Part Code UCZZ01655BZ