EFJohnson 98x3, 98x6, 002-9803-601 manual Microphone Push-To-Talk PTT Switch Not Shown Push

Page 12

CONTROLS AND DISPLAY

A/D - Scan list add/delete (see page 38) BANK - Bank select (see page 20) EMER - Emergency switch (see page 21) ENCPT - Encryption select (see page 21)

FCN - Function select (see following description) HOME - Select home system/group (see page 22) (Menu) - Menu mode select (see page 33)

AUX - Option select (see page 24) ROAM - Roam on-off (see page 43) SCAN - Scan on-off (see page 35)

TEL - Selects telephone group (see “Tel Grp Select” on page 41) (Blank) - Not used (disabled) or one of above functions

FCN (Function) Switch - This switch, if programmed, selects the following functions:

Menu Mode Select - Press FCN twice (see page 33)

Home Sys/Grp Select - FCN/press Select switch (see page 22) Conv Squelch Set - FCN/rotate Select switch (see page 18)

Transmit/Busy Indicator - Indicates the following conditions: Red - Transmitter keyed, normal power output

Orange - Transmitter keyed, power reduced because internal temperature is high (see page 27).

Green - Busy conventional group (channel). Refer to “Monitoring Before Transmitting” on page 44 for more information.

Microphone Jack - Connection point for the microphone.

Microphone Push-To-Talk (PTT) Switch (Not Shown) - Push-

button on the microphone which is pressed to key the transmitter.

Speaker - The internal speaker is located behind the grille. An optional speaker can be connected to the external speaker jack located on the back (see “Speaker Jack” which follows).

12

Image 12

Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General FeaturesControls and Display Front Panel ControlsMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation Numeric Display Mode Alpha Display ModeBacklight Operation System/Group Display ModesSelect Mode Indication With Numeric Display Select Mode Indication With Alpha Tag DisplaySelecting the System and Group Setting Squelch Control Microphone Off-Hook DetectLTR-Net, LTR, and Conventional Operation IntroductionGeneral Features Bank SelectCall Indicator Emergency SwitchEncryption Function FCN Switch Home System/Group SelectHorn Alert Enabled Horn AlertPower Turn-Off Delay Option SelectProceed Clear-To-Talk Tone Receive-Only GroupsStealth Mode Time-Out TimerTone Select Standard Group Calls Transmitter Thermal FoldbackGeneral Placing a Standard Group CallLTR-Net and LTR Operation Conventional OperationTelephone Calls Receiving a Standard Group CallPlacing Telephone Calls Receiving a Telephone Call LTR-NET Auxiliary Calls Landside-Originate Telephone CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary CallsOption Switches Menu Mode Option SwitchesMenu Mode Introduction Menu Mode and Option Switch Functions SwitchUsing Menu Mode System and Group ScanningSystem and Group Scanning System and Group Scanning Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue TimersLTR-NET and LTR Features Transmit InhibitCalls on Priority ID Codes Telephone Group SelectLTR-NET Features LTR-Net Standard and Special CallsBusy Queuing Roaming LTR Features Conventional FeaturesStandard Group Calls Telephone CallsMonitor Mode Selected Transmit Disable On Busy Talk-AroundMiscellaneous Call Guard SquelchSupervisory Tones Miscellaneous LTR-Net Special Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Menu Mode Messages Bright DIM OFFSystem Operator Programming Speaking Into MicrophonePreventing Battery Discharge Operation At Extended RangeLicensing Transceiver Service Miscellaneous