EFJohnson 98x3, 98x6, 002-9803-601 manual Miscellaneous

Page 51

MISCELLANEOUS

power is turned on. This number indicates such things as frequency band, power output, and tier of the transceiver. The eighth digit is reserved and always “0”.

NO ACCES - Indicates that the radio system could not be accessed, perhaps because of an out-of-range condition. Refer to “Operation At Extended Range” on page 54 for more information.

NO PHONE - Indicates that there is no telephone group programmed in the current system when the Telephone option switch is pressed (see page 41).

NO POWER - Indicates that the transmitter temperature or supply voltage is excessive and that the transmitter has been automatically shut down. Release the PTT switch and allow the transmitter to cool. If the problem persists, contact your system operator for service.

NOT AUTH - Indicates that an attempt was made to register on a site where service was not authorized (see page 43).

NOT CONV - Indicates that an attempt was made to enable a conventional mode feature on an LTR-Net or LTR system.

NOT LNET - Indicates that an attempt was made to enable an LTR- Net mode feature on an LTR or conventional system.

OUT-LOCK - Indicates that the synthesizer is unlocked. Refer to “Transceiver Service” on page 55 for more information.

PROG ERR - Indicates an EEPROM read error. Refer to “Trans- ceiver Service” on page 55 for more information.

SLEEPING - Indicates that the transceiver has been temporarily disabled by the system operator. It will be automatically enabled again when operation can be resumed.

SQUELCH - Indicates that the conventional squelch adjust mode is selected (see page 18).

51

Image 51

Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features FeaturesFront Panel Controls Controls and DisplayMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation System/Group Display Modes Numeric Display ModeAlpha Display Mode Backlight OperationSelect Mode Indication With Numeric Display Select Mode Indication With Alpha Tag DisplaySelecting the System and Group Microphone Off-Hook Detect Setting Squelch ControlIntroduction LTR-Net, LTR, and Conventional OperationBank Select General FeaturesCall Indicator Emergency SwitchEncryption Home System/Group Select Function FCN SwitchHorn Alert Horn Alert EnabledOption Select Power Turn-Off DelayReceive-Only Groups Proceed Clear-To-Talk ToneStealth Mode Time-Out TimerTone Select Placing a Standard Group Call Standard Group CallsTransmitter Thermal Foldback GeneralConventional Operation LTR-Net and LTR OperationTelephone Calls Receiving a Standard Group CallPlacing Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsReceiving Auxiliary Calls Placing LTR-Net Auxiliary CallsOption Switches Menu Mode Option SwitchesMenu Mode Introduction Switch Menu Mode and Option Switch FunctionsSystem and Group Scanning Using Menu ModeSystem and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeTransmit Inhibit LTR-NET and LTR FeaturesTelephone Group Select Calls on Priority ID CodesLTR-NET Features LTR-Net Standard and Special CallsBusy Queuing Roaming Telephone Calls LTR FeaturesConventional Features Standard Group CallsMonitor Mode Selected Talk-Around Transmit Disable On BusyMiscellaneous Call Guard SquelchSupervisory Tones Miscellaneous LTR Telephone Call Tones LTR-Net Special Call TonesDisplay Messages Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingPreventing Battery Discharge Operation At Extended RangeLicensing Transceiver Service Miscellaneous