EFJohnson 98x6, 98x3 manual Backlight Operation, System/Group Display Modes, Numeric Display Mode

Page 16

GENERAL OPERATION

Backlight Operation

The display and keypad backlight can be controlled by the

BACKLGT menu parameter (see page 33). The three states that can be selected are Bright, Dim, and Off. If this menu parameter is not select- able, the backlight is fixed in one of these states by programming.

System/Group Display Modes

The selected system and group are displayed using either a Numeric or Alpha display mode. The display mode is selectable if the S/G DISPL menu parameter is available (see page 33). Other- wise, it is fixed in one of these modes by programming.

Numeric Mode - In this mode the selected system and group numbers are displayed on the top line as Sxx and Gxx, and the group alpha tag is displayed on the bottom line. For example, System 1, Group 1 (CAR 220) is displayed as follows. The system alpha tag is not displayed in this mode.

System Number

Group Number

Group Alpha Tag

Numeric Display Mode

Alpha Mode - In the alpha mode, the system alpha tag is displayed on the top line and the group alpha tag is displayed on the bottom line. For example, a “SECURITY” system and “CAR 220” group are displayed as follows. The system and group numbers are not displayed in this mode.

System Alpha Tag

Group Alpha Tag

Alpha Display Mode

16

Image 16

Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General FeaturesControls and Display Front Panel ControlsMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description Determining Volume Level Power-Up SequenceGeneral Operation Numeric Display Mode Alpha Display ModeBacklight Operation System/Group Display ModesSelect Mode Indication With Alpha Tag Display Select Mode Indication With Numeric DisplaySelecting the System and Group Setting Squelch Control Microphone Off-Hook DetectLTR-Net, LTR, and Conventional Operation IntroductionGeneral Features Bank SelectEmergency Switch Call IndicatorEncryption Function FCN Switch Home System/Group SelectHorn Alert Enabled Horn AlertPower Turn-Off Delay Option SelectProceed Clear-To-Talk Tone Receive-Only GroupsTime-Out Timer Stealth ModeTone Select Standard Group Calls Transmitter Thermal FoldbackGeneral Placing a Standard Group CallLTR-Net and LTR Operation Conventional OperationReceiving a Standard Group Call Telephone CallsPlacing Telephone Calls Receiving a Telephone Call LTR-NET Auxiliary Calls Landside-Originate Telephone CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary CallsOption Switches Option Switches Menu ModeMenu Mode Introduction Menu Mode and Option Switch Functions SwitchUsing Menu Mode System and Group ScanningSystem and Group Scanning System and Group Scanning Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue TimersLTR-NET and LTR Features Transmit InhibitCalls on Priority ID Codes Telephone Group SelectLTR-Net Standard and Special Calls LTR-NET FeaturesBusy Queuing Roaming LTR Features Conventional FeaturesStandard Group Calls Telephone CallsMonitor Mode Selected Transmit Disable On Busy Talk-AroundCall Guard Squelch MiscellaneousSupervisory Tones Miscellaneous LTR-Net Special Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Menu Mode Messages Bright DIM OFFSystem Operator Programming Speaking Into MicrophoneOperation At Extended Range Preventing Battery DischargeLicensing Transceiver Service Miscellaneous