EFJohnson 002-9803-601, 98x3, 98x6 Receiving a Standard Group Call, Placing Telephone Calls

Page 29

TELEPHONE CALLS

not indicate that the radio system has been successfully accessed.

5. When the call is complete, place the microphone back on-hook.

Receiving a Standard Group Call

1.Select or scan the system and group programmed for the call you want to receive (see page 35 for scan information).

2.When the message is received, the display usually changes to the system and group of the call. Take the microphone off-hook and press the PTT switch to talk and release it to listen. If scanning, a response may not automatically occur on the group of the call.

Refer to “Transmitting In The Scan Mode” on page 39 for more information.

TELEPHONE CALLS

General

NOTE: Telephone calls can be placed and received only if that service is available to you and your transceiver has been programmed appropriately. In addition, a microphone equipped with a telephone keypad is required to dial the telephone number.

The telephone calling feature allows you to place and receive telephone calls using your transceiver. The following information describes how these calls are made with LTR-Net and LTR opera- tion. If you can make telephone calls with conventional operation, the procedure may be somewhat different and your system operator will then provide additional information. Proceed as follows:

Placing Telephone Calls

1.Turn transceiver power on and set the volume as described starting on page 15. Select the group programmed for telephone calls. To

29

Image 29

Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features FeaturesFront Panel Controls Controls and DisplayMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Alpha Display Mode Numeric Display ModeBacklight Operation System/Group Display ModesSelecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Microphone Off-Hook Detect Setting Squelch ControlIntroduction LTR-Net, LTR, and Conventional OperationBank Select General FeaturesEncryption Call IndicatorEmergency Switch Home System/Group Select Function FCN SwitchHorn Alert Horn Alert EnabledOption Select Power Turn-Off DelayReceive-Only Groups Proceed Clear-To-Talk ToneTone Select Stealth ModeTime-Out Timer Transmitter Thermal Foldback Standard Group CallsGeneral Placing a Standard Group CallConventional Operation LTR-Net and LTR OperationPlacing Telephone Calls Telephone CallsReceiving a Standard Group Call Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsReceiving Auxiliary Calls Placing LTR-Net Auxiliary CallsMenu Mode Introduction Option Switches Menu ModeOption Switches Switch Menu Mode and Option Switch FunctionsSystem and Group Scanning Using Menu ModeSystem and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeTransmit Inhibit LTR-NET and LTR FeaturesTelephone Group Select Calls on Priority ID CodesBusy Queuing LTR-NET FeaturesLTR-Net Standard and Special Calls Roaming Conventional Features LTR FeaturesStandard Group Calls Telephone CallsMonitor Mode Selected Talk-Around Transmit Disable On BusySupervisory Tones MiscellaneousCall Guard Squelch Miscellaneous LTR Telephone Call Tones LTR-Net Special Call TonesDisplay Messages Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingLicensing Preventing Battery DischargeOperation At Extended Range Transceiver Service Miscellaneous