EFJohnson 98x3, 98x6, 002-9803-601 General Operation, Power-Up Sequence, Determining Volume Level

Page 15

GENERAL OPERATION

- Indicates that an option controlled by the AUX switch or OPTION menu parameter is enabled (see page 24).

- Indicates that a call has been received on a group programmed for a call indicator (see page 21). To turn this indication off, press any key.

- Indicates that the monitor mode is enabled. This mode disables Call Guard squelch and other squelch control features so that all messages are heard on conventional systems (see page 44).

GENERAL OPERATION

Power-Up Sequence

When power is turned on, the backlight turns on, all segments in the display are momentarily enabled, and the last seven digits of the transceiver part number are very briefly displayed. A beep then sounds (if tones are enabled) and the transceiver is operational.

Determining Volume Level

The relative volume setting can be determined by noting the position of the index on the volume knob. You may also be able to enable a reference tone or background noise for use in setting the volume. Proceed as follows:

If key press tones are enabled, a short tone sounds when an option switch is pressed or the Select switch is pressed or rotated.

If a conventional system is selected, take the microphone off-hook and if someone is using the channel, voice is heard. If no one is using the channel, the squelch control can be adjusted counter- clockwise as described in “Setting Squelch Control” on page 18 and noise is heard. It is not possible to unsquelch the transceiver in this manner when an LTR-Net or LTR system is selected.

15

Image 15
Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features FeaturesFront Panel Controls Controls and DisplayMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation System/Group Display Modes Numeric Display ModeAlpha Display Mode Backlight OperationSelect Mode Indication With Numeric Display Select Mode Indication With Alpha Tag DisplaySelecting the System and Group Microphone Off-Hook Detect Setting Squelch ControlIntroduction LTR-Net, LTR, and Conventional OperationBank Select General FeaturesCall Indicator Emergency SwitchEncryption Home System/Group Select Function FCN SwitchHorn Alert Horn Alert EnabledOption Select Power Turn-Off DelayReceive-Only Groups Proceed Clear-To-Talk ToneStealth Mode Time-Out TimerTone Select Placing a Standard Group Call Standard Group CallsTransmitter Thermal Foldback GeneralConventional Operation LTR-Net and LTR OperationTelephone Calls Receiving a Standard Group CallPlacing Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsReceiving Auxiliary Calls Placing LTR-Net Auxiliary CallsOption Switches Menu Mode Option SwitchesMenu Mode Introduction Switch Menu Mode and Option Switch FunctionsSystem and Group Scanning Using Menu ModeSystem and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeTransmit Inhibit LTR-NET and LTR FeaturesTelephone Group Select Calls on Priority ID CodesLTR-NET Features LTR-Net Standard and Special CallsBusy Queuing Roaming Telephone Calls LTR FeaturesConventional Features Standard Group CallsMonitor Mode Selected Talk-Around Transmit Disable On BusyMiscellaneous Call Guard SquelchSupervisory Tones Miscellaneous LTR Telephone Call Tones LTR-Net Special Call TonesDisplay Messages Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingPreventing Battery Discharge Operation At Extended RangeLicensing Transceiver Service Miscellaneous