EFJohnson 002-9803-601, 98x3, 98x6 manual System and Group Scanning, Using Menu Mode

Page 35

SYSTEM AND GROUP SCANNING

Using Menu Mode

1.To select the menu mode, press the Menu switch or FCN FCN (the FCN switch twice). The top line of the display indicates the func- tion being edited, and the bottom line indicates the current status of that function (see following illustration).

Function

Status

2.To display the various functions that are controllable by the menu mode (top line indication), rotate the Select switch. The currently selected status of that function is displayed on the bottom line.

3.To change the selected status, press the Select switch. The selec- tions displayed for each menu function are shown on page 52.

4.The selected status conditions for the various functions are saved when the menu mode is exited in one of the following ways:

Pressing the FCN switch again

Pressing the PTT switch

Automatically when time-out occurs 2 seconds after a change is made or 8 seconds after no changes are made.

SYSTEM AND GROUP SCANNING

General

Introduction

The scan feature monitors, in sequence, the programmed

systems and/or groups in the scan list. When a message is detected that the transceiver is programmed to receive, scanning stops and the

35

Image 35
Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features FeaturesFront Panel Controls Controls and DisplayMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Modes Numeric Display ModeAlpha Display Mode Backlight OperationSelecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Microphone Off-Hook Detect Setting Squelch ControlIntroduction LTR-Net, LTR, and Conventional OperationBank Select General FeaturesEncryption Call IndicatorEmergency Switch Home System/Group Select Function FCN SwitchHorn Alert Horn Alert EnabledOption Select Power Turn-Off DelayReceive-Only Groups Proceed Clear-To-Talk ToneTone Select Stealth ModeTime-Out Timer Placing a Standard Group Call Standard Group CallsTransmitter Thermal Foldback GeneralConventional Operation LTR-Net and LTR OperationPlacing Telephone Calls Telephone CallsReceiving a Standard Group Call Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsReceiving Auxiliary Calls Placing LTR-Net Auxiliary CallsMenu Mode Introduction Option Switches Menu ModeOption Switches Switch Menu Mode and Option Switch FunctionsSystem and Group Scanning Using Menu ModeSystem and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeTransmit Inhibit LTR-NET and LTR FeaturesTelephone Group Select Calls on Priority ID CodesBusy Queuing LTR-NET FeaturesLTR-Net Standard and Special Calls Roaming Telephone Calls LTR FeaturesConventional Features Standard Group CallsMonitor Mode Selected Talk-Around Transmit Disable On BusySupervisory Tones MiscellaneousCall Guard Squelch Miscellaneous LTR Telephone Call Tones LTR-Net Special Call TonesDisplay Messages Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingLicensing Preventing Battery DischargeOperation At Extended Range Transceiver Service Miscellaneous