EFJohnson 002-9803-601, 98x3, 98x6 manual Display Messages

Page 50

MISCELLANEOUS

Conversation Time-Out Tone - Calls are limited to a certain length by the system. Thirty seconds before this time is reached, a “tick” begins sounding each second. When the 30-second time expires, the call is automatically terminated by the system.

Turn-Around Tone - This is a single beep which may be used to indicate to the landside party when to respond to your transmission. It sounds when you release the PTT switch, and you may partially hear this tone.

Proceed Tone - This tone consists of two beeps and it tells the land- side caller when to enter the five-digit number specifying the mobile being called. Dialing of this number must be started within 5 sec. of hearing this tone, and a tone-type telephone must be used.

Display Messages

The following messages appear in the display to indicate various operating modes and error conditions.

BUSY - Indicates that the LTR-Net or LTR radio system is currently busy (see “Busy Tone” on page 47).

CALL SVC - Indicates that the transceiver is inoperative. Contact your system operator for service.

DSBL BSY - Indicates that the transmitter is disabled by the conventional Transmit Disable On Busy feature (see page 46). It also indicates that the transmitter was keyed while receiving an LTR-Net or LTR call.

FCN - Indicates that the function select mode is selected by the FCN option switch (see page 22).

LCL SRCH - Indicates that the transceiver is currently searching for a new locality (site) on which to register (see page 43).

Model - The last seven digits of the transceiver part number are indi- cated very briefly on the top line of the display when transceiver

50

Image 50

Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General FeaturesControls and Display Front Panel ControlsMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Backlight Operation Numeric Display ModeAlpha Display Mode System/Group Display ModesSelecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch Control Microphone Off-Hook DetectLTR-Net, LTR, and Conventional Operation IntroductionGeneral Features Bank SelectEncryption Call IndicatorEmergency Switch Function FCN Switch Home System/Group SelectHorn Alert Enabled Horn AlertPower Turn-Off Delay Option SelectProceed Clear-To-Talk Tone Receive-Only GroupsTone Select Stealth ModeTime-Out Timer General Standard Group CallsTransmitter Thermal Foldback Placing a Standard Group CallLTR-Net and LTR Operation Conventional OperationPlacing Telephone Calls Telephone CallsReceiving a Standard Group Call Receiving a Telephone Call LTR-NET Auxiliary Calls Landside-Originate Telephone CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary CallsMenu Mode Introduction Option Switches Menu ModeOption Switches Menu Mode and Option Switch Functions SwitchUsing Menu Mode System and Group ScanningSystem and Group Scanning System and Group Scanning Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue TimersLTR-NET and LTR Features Transmit InhibitCalls on Priority ID Codes Telephone Group SelectBusy Queuing LTR-NET FeaturesLTR-Net Standard and Special Calls Roaming Standard Group Calls LTR FeaturesConventional Features Telephone CallsMonitor Mode Selected Transmit Disable On Busy Talk-AroundSupervisory Tones MiscellaneousCall Guard Squelch Miscellaneous LTR-Net Special Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Menu Mode Messages Bright DIM OFFSystem Operator Programming Speaking Into MicrophoneLicensing Preventing Battery DischargeOperation At Extended Range Transceiver Service Miscellaneous