EFJohnson 002-9803-601, 98x3, 98x6 manual Horn Alert Enabled

Page 23

GENERAL FEATURES

HOME option switch if it is programmed. The Home system/group is then displayed and it becomes the selected system/group. If no home system/group or FCN or HOME option switch has been programmed, this function is not available. A different home system/ group can be programmed for each bank.

Horn Alert

NOTE: The horn alert feature is not be available with some early models.

If this feature has been installed by your system operator, it activates an external alert such as the vehicle horn or lights when a call is received on a group programmed for horn alert. When the

horn alert is enabled, is displayed as shown in the following illustration.

Horn Alert

Enabled

When enabled, the horn alert pulses on and off for 1-8 cycles and then goes back to the disabled state. To change the currently selected horn alert mode, the HRN ALRT menu parameter can be used if available (see page 33).

The horn alert is programmed to operate in the manual or auto- matic mode (see descriptions which follow). If the ignition switch does not control transceiver power, only the front panel power switch affects operation when applicable. Refer to “Power Turn-Off Delay” on page 24 for more information.

Manual Off/On Mode

The horn alert mode does not change when power is turned on and off by either the ignition switch or power switch. Therefore, the horn alert is entirely controlled by the HRN ALRT menu parameter.

23

Image 23

Contents LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features FeaturesFront Panel Controls Controls and DisplayMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Modes Numeric Display ModeAlpha Display Mode Backlight OperationSelecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Microphone Off-Hook Detect Setting Squelch ControlIntroduction LTR-Net, LTR, and Conventional OperationBank Select General FeaturesEncryption Call IndicatorEmergency Switch Home System/Group Select Function FCN SwitchHorn Alert Horn Alert EnabledOption Select Power Turn-Off DelayReceive-Only Groups Proceed Clear-To-Talk ToneTone Select Stealth ModeTime-Out Timer Placing a Standard Group Call Standard Group CallsTransmitter Thermal Foldback GeneralConventional Operation LTR-Net and LTR OperationPlacing Telephone Calls Telephone CallsReceiving a Standard Group Call Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsReceiving Auxiliary Calls Placing LTR-Net Auxiliary CallsMenu Mode Introduction Option Switches Menu ModeOption Switches Switch Menu Mode and Option Switch FunctionsSystem and Group Scanning Using Menu ModeSystem and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeTransmit Inhibit LTR-NET and LTR FeaturesTelephone Group Select Calls on Priority ID CodesBusy Queuing LTR-NET FeaturesLTR-Net Standard and Special Calls Roaming Telephone Calls LTR FeaturesConventional Features Standard Group CallsMonitor Mode Selected Talk-Around Transmit Disable On BusySupervisory Tones MiscellaneousCall Guard Squelch Miscellaneous LTR Telephone Call Tones LTR-Net Special Call TonesDisplay Messages Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingLicensing Preventing Battery DischargeOperation At Extended Range Transceiver Service Miscellaneous