MISCELLANEOUS
Error Tone - This is a
LTR-Net Special Call Tones
The following tones are generated by the
Confirmation Tone - This is a short tone that sounds when the num- ber just dialed has been accepted by the system.
Call Proceed Tone - With
page 32), ringing does not occur after the number is dialed. Instead, another short tone sounds after the confirmation tone to indicate that the audio path is complete and speaking can begin.
End Call Tone - Three beeps which indicate that the end of the call has been detected by the system.
Proceed Dialing Tone - When placing a
LTR Telephone Call Tones
The following tones are generated by LTR interconnect equip- ment and are heard when making LTR telephone calls.
Reorder Tone - Three beeps which indicate that the call has been terminated by the system.
Return Time Warning Tone - Two beeps which warn that you have not transmitted for an extended period. If you do not transmit within 5 seconds, the call is automatically terminated by the system. The time between transmissions is one of the parameters used by the system to detect the end of a call when the # character is not sent.
49