SYSTEM AND GROUP SCANNING
Scan Types
The type of scanning selected is determined by the menu mode SCN TYPE parameter (see page 33). If it is not selectable, the type of scanning is fixed by programming. The available scan types are as follows.
SYSTEMS - Both system and group GROUPS - Group scanning only
OFF - Both types disabled (SCAN switch
If the SCAN option switch is not programmed, the selected mode is always enabled. If both the switch and SCN TYPE menu parameter are disabled, the scan mode and type are fixed by programming. The selected system and group can be changed while scanning using the Select switch in the normal manner. Scanning resumes shortly after the change is made.
When a call is received in the scan mode, the display changes to the system and group of the call. Programming determines if this change is temporary or permanent, and if a response occurs on the system/group of the call or the selected system/group. Refer to “Transmitting In The Scan Mode” on page 39 for more information.
When system scanning with an
When system scanning with roaming enabled, registration on other sites occurs normally and scanning operates as just described. However, if the current
37