Chapter 1 Cisco SDM Express
Internet (WAN): Autodetect Encapsulation
Internet (WAN): Autodetect Encapsulation
Cisco SDM Express supports autodetect on SB 106, SB 107, Cisco 836 and Cisco 837 routers. However, if you are configuring a Cisco 837 router running a Cisco IOS release 12.3(8)T or 12.3(8.3)T, the autodetect feature is not supported.
Click the Autodetect button to have Cisco SDM Express discover the encapsulation type. If Cisco SDM Express succeeds, it will automatically supply the encapsulation type and other configuration parameters it discovers.
If Cisco SDM Express is unable to detect the type of encapsulation, you must specify the encapsulation and authentication types by clicking User Specified.
Status Icon and Enable or Disable Button
The Status icon is displayed when you are using Cisco SDM Express to edit an initial configuration. The Up arrow icon indicates the interface is up. The Down arrow icon indicates the interface is down.
The Enable or Disable button is available when you are using
Cisco SDM Express to edit an initial configuration. If a selected interface is enabled, you can use the Disable button to shut down the interface. If a selected interface is shut down, you can use the Enable button to enable the interface.
Internet (WAN): User Specified Encapsulation
Use this window to configure a WAN interface when you are specifying the encapsulation.
Status Icon and Enable or Disable Button
The Status icon is displayed when you are using Cisco SDM Express to edit an initial configuration. The Up arrow icon indicates the interface is up. The Down arrow icon indicates the interface is down.
The Enable or Disable button is available when you are using
Cisco SDM Express to edit an initial configuration. If a selected interface is enabled, you can use the Disable button to shut down the interface. If a selected interface is shut down, you can use the Enable button to enable the interface.
|
| Cisco SDM Express |
|
|
|
|
| ||
|
|
| ||
|
|
|