321 Studios OL-7141-04 manual Update SDM from Local PC, Update SDM from CD, CCO Login

Page 66

Chapter 2 Cisco SDM Express Edit Mode

Tools

CCO Login

You must provide a CCO login and password to access this web page. Provide a username and password, and then click OK.

If you do not have a CCO login and password, you can obtain one by opening a web browser and going to the Cisco website at the following link:

http://www.cisco.com

When the webpage opens, click Register and provide the necessary information to obtain a username and password. Then, try this operation again.

Update SDM from Local PC

You can update SDM using an SDM.zip file you have downloaded from Cisco.com. SDM provides an update wizard that will copy the necessary files to your router.

To update SDM from the PC you are using to run SDM follow these steps:

Step 1 Download the file sdm-vnn.zip from the following URL:

http://www.cisco.com/cgi-bin/tablebuild.pl/sdm

If there is more than one SDM .zip file, obtain the copy with the highest version number.

Step 2 Use the update wizard to copy the SDM files from your PC to the router.

Update SDM from CD

If you have the SDM CD, you can use it to update SDM on your router. To do so, follow these steps:

Step 1 Place the SDM CD in the CD drive on your PC.

Step 2 Select Update SDM from CD, and click Update Software in the General Instructions window after reading the text.

	Cisco SDM Express
2-14	OL-7141-04

Image 66

Contents Cisco SDM Express User’s Guide Cisco SDM Express User’s Guide N T E N T S Contents Cisco SDM Express Edit Mode Contents Welcome A P T E RHostname Field Basic ConfigurationUsername and Password Fields Domain Name FieldEnable Secret Password Field Router ProvisioningSDM Express Secure Device Provisioning Provision From USB TokenUSB Token or USB Flash CNS ServerProvision From USB Flash File Selection Name Wireless Interface ConfigurationLAN Interface Configuration SizeIP Address Field Wireless Parameters FieldsInterface/Bridge-to-Interface List Subnet Mask FieldRefresh, Apply Changes, Discard Changes Buttons Dhcp Server ConfigurationEnable Dhcp server on the LAN interface Check Box Starting IP Address FieldEnding IP Address Field Primary Domain Name Server FieldSecondary Domain Name Server Field Use these DNS values for Dhcp clients Check Box Enable PPPoE Check BoxInternet WAN Ethernet Interface Address Type ListConfirm Password Field Authentication Type Check BoxPassword Field Username FieldStatus Icon and Enable or Disable Button Internet WAN Autodetect EncapsulationInternet WAN User Specified Encapsulation Encapsulation List Virtual Path Identifier FieldVirtual Circuit Identifier Field IP Address for Remote Connection in Central Office Field Enable or Disable Button WAN Interface SelectionAdd Connection, Edit, Delete Buttons Serial Connection Interface ListRefresh Button Frame Relay Configuration Settings Link IP Address and Subnet Mask FieldsLMI Type Field Frame Relay Configuration SettingsDlci Field Use Ietf Frame Relay Encapsulation Check BoxInternet WAN Advanced Options CNS Server InformationFirewall Configuration Primary DNS FieldSecondary DNS Field Security Settings Disable Snmp Services on Your Router Check Box Disable Services that Involve Security Risks Check BoxEnhance Security on Router Access Check Box Encrypt Passwords Check BoxSummary Cisco Network Services Supplementary HelpCisco Router and Security Device Manager Security Settings Disable SnmpDisable Finger Service Disable PAD ServiceDisable TCP Small Servers Service Disable UDP Small Servers Service Disable IP Bootp Server ServiceDisable IP Identification Service Disable CDPDisable IP Source Route Enable Password Encryption ServiceEnable Netflow Switching Enable TCP Keepalives for Inbound Telnet SessionsEnable TCP Keepalives for Outbound Telnet Sessions Enable Sequence Numbers and Time Stamps on DebugsEnable IP CEF Set Scheduler Interval Set Scheduler AllocateSet TCP Synwait Time Enable Logging Enable Unicast RPF on Outside InterfacesDisable IP Gratuitous ARPs Disable IP RedirectsDisable IP Proxy ARP Disable IP Directed BroadcastDisable MOP Service Disable IP UnreachablesDisable IP Mask Reply Set Minimum Password Length to Less Than 6 CharactersSet Authentication Failure Rate to Less Than 3 Retries Set BannerEnable Telnet Settings Enable SSH for Access to the RouterCisco SDM Express Buttons Help ButtonAbout Button Apply Changes Button Reconnecting to the Router After Initial ConfigurationExit Button Discard Changes ButtonTesting Your WAN Internet Connection SDP Troubleshooting Tips Troubleshooting TipsOverview IconsLAN Fields Internet WAN Fields Firewall FieldsUsername/Login Password/Password is Encrypted Fields Edit/Delete ButtonsEdit a Username Encrypt password using MD5 hash algorithm CheckboxBridge/Do not bridge LAN interface with wireless Checkbox Refresh/Apply Changes/Discard Changes ButtonsLAN interface configuration Fields WirelessWAN-Unable to Configure WAN Interface No WAN AvailableEnable Firewall/Disable Firewall Buttons Delete ConnectionFirewall Unable to configure Firewall Window Unable to Configure NATAdd or Edit Address Translation Rule Routing Disable Services that Involve Security Risks Checkbox Select All Recommended by Cisco CheckboxEncrypt Passwords Checkbox Synchronize with my local PC clock CheckboxTools PingSource Field Update SDM from Cisco.comTo clear the output of the ping command Destination FieldUpdate SDM from Local PC Update SDM from CDCCO Login Date and Time Properties Synchronize CheckboxEdit Date and Time Fields Write down these steps and then reset the router Reset to Factory DefaultsSave Running Config to PC Apply ButtonReconfiguring Your PC with a Static or a Dynamic IP Address Microsoft Windows NT Feature Not Available Cisco SDM Express Edit Mode Feature Not Available D E IN-2