321 Studios OL-7141-04 manual Welcome, A P T E R

Page 7

C H A P T E R 1

Cisco SDM Express

The Cisco SDM Express windows guide you through basic configuration of the router. After you complete the basic configuration, the router is available on the LAN, has a WAN connection, and has a firewall.

Welcome

This wizard guides you through a basic configuration that will help you do the following:

Name the router.

Specify a username and specify passwords.

You can configure the router manually using the Cisco SDM Express wizard, or provision it with a configuration file loaded from a USB token or a USB flash device, Secure Device Provisioning (SDP), or Cisco Network Services, if supported by your Cisco IOS release.

If you use Cisco Network Services to configure your router, you can provide Cisco Network Services parameters that will enable the router to contact a Cisco Network Services server and obtain a configuration.

Change the factory default LAN IP address.

This task is bypassed if SDP or Cisco Network Services is chosen for provisioning the router.

Create a DHCP address pool for the LAN.

 

 

Cisco SDM Express

 

 

 

 

 

 

OL-7141-04

 

 

1-1

 

 

 

Image 7
Contents Cisco SDM Express User’s Guide Cisco SDM Express User’s Guide N T E N T S Contents Cisco SDM Express Edit Mode Contents A P T E R WelcomeDomain Name Field Basic ConfigurationUsername and Password Fields Hostname FieldRouter Provisioning Enable Secret Password FieldSDM Express CNS Server Provision From USB TokenUSB Token or USB Flash Secure Device ProvisioningProvision From USB Flash File Selection Size Wireless Interface ConfigurationLAN Interface Configuration NameSubnet Mask Field Wireless Parameters FieldsInterface/Bridge-to-Interface List IP Address FieldStarting IP Address Field Dhcp Server ConfigurationEnable Dhcp server on the LAN interface Check Box Refresh, Apply Changes, Discard Changes ButtonsPrimary Domain Name Server Field Ending IP Address FieldSecondary Domain Name Server Field Address Type List Enable PPPoE Check BoxInternet WAN Ethernet Interface Use these DNS values for Dhcp clients Check BoxUsername Field Authentication Type Check BoxPassword Field Confirm Password FieldInternet WAN Autodetect Encapsulation Status Icon and Enable or Disable ButtonInternet WAN User Specified Encapsulation Virtual Path Identifier Field Encapsulation ListVirtual Circuit Identifier Field IP Address for Remote Connection in Central Office Field WAN Interface Selection Enable or Disable ButtonAdd Connection, Edit, Delete Buttons Interface List Serial ConnectionRefresh Button IP Address and Subnet Mask Fields Frame Relay Configuration Settings LinkUse Ietf Frame Relay Encapsulation Check Box Frame Relay Configuration SettingsDlci Field LMI Type FieldCNS Server Information Internet WAN Advanced OptionsPrimary DNS Field Firewall ConfigurationSecondary DNS Field Security Settings Disable Services that Involve Security Risks Check Box Disable Snmp Services on Your Router Check BoxEncrypt Passwords Check Box Enhance Security on Router Access Check BoxSummary Supplementary Help Cisco Network ServicesCisco Router and Security Device Manager Disable Snmp Security SettingsDisable PAD Service Disable Finger ServiceDisable TCP Small Servers Service Disable IP Bootp Server Service Disable UDP Small Servers ServiceDisable CDP Disable IP Identification ServiceEnable Password Encryption Service Disable IP Source RouteEnable TCP Keepalives for Inbound Telnet Sessions Enable Netflow SwitchingEnable Sequence Numbers and Time Stamps on Debugs Enable TCP Keepalives for Outbound Telnet SessionsEnable IP CEF Set Scheduler Allocate Set Scheduler IntervalSet TCP Synwait Time Enable Unicast RPF on Outside Interfaces Enable LoggingDisable IP Redirects Disable IP Gratuitous ARPsDisable IP Directed Broadcast Disable IP Proxy ARPDisable IP Unreachables Disable MOP ServiceSet Minimum Password Length to Less Than 6 Characters Disable IP Mask ReplySet Banner Set Authentication Failure Rate to Less Than 3 RetriesEnable SSH for Access to the Router Enable Telnet SettingsHelp Button Cisco SDM Express ButtonsAbout Button Discard Changes Button Reconnecting to the Router After Initial ConfigurationExit Button Apply Changes ButtonTesting Your WAN Internet Connection Troubleshooting Tips SDP Troubleshooting TipsIcons OverviewLAN Fields Firewall Fields Internet WAN FieldsEdit/Delete Buttons Username/Login Password/Password is Encrypted FieldsRefresh/Apply Changes/Discard Changes Buttons Encrypt password using MD5 hash algorithm CheckboxBridge/Do not bridge LAN interface with wireless Checkbox Edit a UsernameNo WAN Available WirelessWAN-Unable to Configure WAN Interface LAN interface configuration FieldsDelete Connection Enable Firewall/Disable Firewall ButtonsFirewall Unable to Configure NAT Unable to configure Firewall WindowAdd or Edit Address Translation Rule Routing Select All Recommended by Cisco Checkbox Disable Services that Involve Security Risks CheckboxSynchronize with my local PC clock Checkbox Encrypt Passwords CheckboxPing ToolsDestination Field Update SDM from Cisco.comTo clear the output of the ping command Source FieldUpdate SDM from CD Update SDM from Local PCCCO Login Synchronize Checkbox Date and Time PropertiesEdit Date and Time Fields Apply Button Reset to Factory DefaultsSave Running Config to PC Write down these steps and then reset the routerReconfiguring Your PC with a Static or a Dynamic IP Address Microsoft Windows NT Feature Not Available Cisco SDM Express Edit Mode Feature Not Available D E IN-2