321 Studios OL-7141-04 manual Provision From USB Flash

Page 11

Chapter 1 Cisco SDM Express

Provision From USB Flash

Note This window appears only if a USB token is connected to your router. If both a USB token and a USB flash device are connected to your router,

Cisco SDM Express will use the USB token. If you want to use the USB flash device connected to your router, all USB tokens must be removed from your router before running Cisco SDM Express.

When you provision your router with a CCCD configuration file, the file is merged with the running configuration, and it also becomes part of the startup configuration.

Caution Cisco SDM does not check the validity of configuration files you use to provision your router. Be sure that the contents of the configuration file you plan to use contain the appropriate settings.

To provision your router from a USB token, follow these steps:

Step 1 Choose the USB token name from the Token Name drop-down menu.

Step 2 Choose Specify device and PIN and enter a PIN in the Token PIN field if you do not want to use the default PIN to log in to the USB token.

If you choose Specify device and default PIN, the default PIN 1234567890 is used to log in to the USB token.

Step 3 Click Login to log in to the USB token.

If you are unable to log in to the USB token, your router cannot be provisioned from the USB token. Click the Back button and choose a different method to provision your router.

Step 4 Click Preview CCCD to display the contents of the file in the lower pane.

Provision From USB Flash

This window allows you to provision your router with a configuration file loaded from a USB flash device connected to your router. This window appears only if a USB flash device is connected to your router.

		Cisco SDM Express
		Cisco SDM Express
	OL-7141-04			1-5
	OL-7141-04			1-5

Image 11

Contents Cisco SDM Express User’s Guide Cisco SDM Express User’s Guide N T E N T S Contents Cisco SDM Express Edit Mode Contents A P T E R WelcomeDomain Name Field Basic ConfigurationUsername and Password Fields Hostname FieldSDM Express Enable Secret Password FieldRouter Provisioning CNS Server Provision From USB TokenUSB Token or USB Flash Secure Device ProvisioningProvision From USB Flash File Selection Size Wireless Interface ConfigurationLAN Interface Configuration NameSubnet Mask Field Wireless Parameters FieldsInterface/Bridge-to-Interface List IP Address FieldStarting IP Address Field Dhcp Server ConfigurationEnable Dhcp server on the LAN interface Check Box Refresh, Apply Changes, Discard Changes ButtonsSecondary Domain Name Server Field Ending IP Address FieldPrimary Domain Name Server Field Address Type List Enable PPPoE Check BoxInternet WAN Ethernet Interface Use these DNS values for Dhcp clients Check BoxUsername Field Authentication Type Check BoxPassword Field Confirm Password FieldInternet WAN User Specified Encapsulation Status Icon and Enable or Disable ButtonInternet WAN Autodetect Encapsulation Virtual Circuit Identifier Field Encapsulation ListVirtual Path Identifier Field IP Address for Remote Connection in Central Office Field Add Connection, Edit, Delete Buttons Enable or Disable ButtonWAN Interface Selection Refresh Button Serial ConnectionInterface List IP Address and Subnet Mask Fields Frame Relay Configuration Settings LinkUse Ietf Frame Relay Encapsulation Check Box Frame Relay Configuration SettingsDlci Field LMI Type FieldCNS Server Information Internet WAN Advanced OptionsSecondary DNS Field Firewall ConfigurationPrimary DNS Field Security Settings Disable Services that Involve Security Risks Check Box Disable Snmp Services on Your Router Check BoxSummary Enhance Security on Router Access Check BoxEncrypt Passwords Check Box Cisco Router and Security Device Manager Cisco Network ServicesSupplementary Help Disable Snmp Security SettingsDisable PAD Service Disable Finger ServiceDisable TCP Small Servers Service Disable IP Bootp Server Service Disable UDP Small Servers ServiceDisable CDP Disable IP Identification ServiceEnable Password Encryption Service Disable IP Source RouteEnable TCP Keepalives for Inbound Telnet Sessions Enable Netflow SwitchingEnable IP CEF Enable TCP Keepalives for Outbound Telnet SessionsEnable Sequence Numbers and Time Stamps on Debugs Set Scheduler Allocate Set Scheduler IntervalSet TCP Synwait Time Enable Unicast RPF on Outside Interfaces Enable LoggingDisable IP Redirects Disable IP Gratuitous ARPsDisable IP Directed Broadcast Disable IP Proxy ARPDisable IP Unreachables Disable MOP ServiceSet Minimum Password Length to Less Than 6 Characters Disable IP Mask ReplySet Banner Set Authentication Failure Rate to Less Than 3 RetriesEnable SSH for Access to the Router Enable Telnet SettingsAbout Button Cisco SDM Express ButtonsHelp Button Discard Changes Button Reconnecting to the Router After Initial ConfigurationExit Button Apply Changes ButtonTesting Your WAN Internet Connection Troubleshooting Tips SDP Troubleshooting TipsLAN Fields OverviewIcons Firewall Fields Internet WAN FieldsEdit/Delete Buttons Username/Login Password/Password is Encrypted FieldsRefresh/Apply Changes/Discard Changes Buttons Encrypt password using MD5 hash algorithm CheckboxBridge/Do not bridge LAN interface with wireless Checkbox Edit a UsernameNo WAN Available WirelessWAN-Unable to Configure WAN Interface LAN interface configuration FieldsFirewall Enable Firewall/Disable Firewall ButtonsDelete Connection Unable to Configure NAT Unable to configure Firewall WindowAdd or Edit Address Translation Rule Routing Select All Recommended by Cisco Checkbox Disable Services that Involve Security Risks CheckboxSynchronize with my local PC clock Checkbox Encrypt Passwords CheckboxPing ToolsDestination Field Update SDM from Cisco.comTo clear the output of the ping command Source FieldCCO Login Update SDM from Local PCUpdate SDM from CD Edit Date and Time Fields Date and Time PropertiesSynchronize Checkbox Apply Button Reset to Factory DefaultsSave Running Config to PC Write down these steps and then reset the routerReconfiguring Your PC with a Static or a Dynamic IP Address Microsoft Windows NT Feature Not Available Cisco SDM Express Edit Mode Feature Not Available D E IN-2