321 Studios OL-7141-04 manual Routing

Page 61

Chapter 2 Cisco SDM Express Edit Mode

Routing

The server is not a web or email server, but requires port translation to provide service. This choise activates the Translated Port field and the Protocol drop-down menu.

If you do not choose a server type, all traffic intended for the public IP address you choose for the server will be routed to it, and no port translation will be done.

Original Port

Enter the port number used by the server to accept service requests from the internal network.

Translated Port

Enter the port number used by the server to accept service requests from the

Internet.

Protocol

Choose TCP or UDP for the protocol used by the server with the original and translated ports.

Routing

The Routing window allows you to edit an existing default route when configuration changes indicate that editing the default route is advisable. For example, if you have changed a static IP address of a WAN interface, you may also need to change the IP address of the default gateway.

Enable Check Box

Check if you want to enable a default route. If a default route has already been defined, this box will be checked. Unchecking it disables the default route.

Forwarding (Next Hop) Field

You can specify an interface on the router as the next hop, or you can specify an IP address. If you click Interface, select the interface from the drop down list. If you click IP address, enter the IP address.

 

 

Cisco SDM Express

 

 

 

 

 

 

OL-7141-04

 

 

2-9

 

 

 

Image 61
Contents Cisco SDM Express User’s Guide Cisco SDM Express User’s Guide N T E N T S Contents Cisco SDM Express Edit Mode Contents A P T E R WelcomeUsername and Password Fields Basic ConfigurationHostname Field Domain Name FieldRouter Provisioning Enable Secret Password FieldSDM Express USB Token or USB Flash Provision From USB TokenSecure Device Provisioning CNS ServerProvision From USB Flash File Selection LAN Interface Configuration Wireless Interface ConfigurationName SizeInterface/Bridge-to-Interface List Wireless Parameters FieldsIP Address Field Subnet Mask FieldEnable Dhcp server on the LAN interface Check Box Dhcp Server ConfigurationRefresh, Apply Changes, Discard Changes Buttons Starting IP Address FieldPrimary Domain Name Server Field Ending IP Address FieldSecondary Domain Name Server Field Internet WAN Ethernet Interface Enable PPPoE Check BoxUse these DNS values for Dhcp clients Check Box Address Type ListPassword Field Authentication Type Check BoxConfirm Password Field Username FieldInternet WAN Autodetect Encapsulation Status Icon and Enable or Disable ButtonInternet WAN User Specified Encapsulation Virtual Path Identifier Field Encapsulation ListVirtual Circuit Identifier Field IP Address for Remote Connection in Central Office Field WAN Interface Selection Enable or Disable ButtonAdd Connection, Edit, Delete Buttons Interface List Serial ConnectionRefresh Button IP Address and Subnet Mask Fields Frame Relay Configuration Settings LinkDlci Field Frame Relay Configuration SettingsLMI Type Field Use Ietf Frame Relay Encapsulation Check BoxCNS Server Information Internet WAN Advanced OptionsPrimary DNS Field Firewall ConfigurationSecondary DNS Field Security Settings Disable Services that Involve Security Risks Check Box Disable Snmp Services on Your Router Check BoxEncrypt Passwords Check Box Enhance Security on Router Access Check BoxSummary Supplementary Help Cisco Network ServicesCisco Router and Security Device Manager Disable Snmp Security SettingsDisable PAD Service Disable Finger ServiceDisable TCP Small Servers Service Disable IP Bootp Server Service Disable UDP Small Servers ServiceDisable CDP Disable IP Identification ServiceEnable Password Encryption Service Disable IP Source RouteEnable TCP Keepalives for Inbound Telnet Sessions Enable Netflow SwitchingEnable Sequence Numbers and Time Stamps on Debugs Enable TCP Keepalives for Outbound Telnet SessionsEnable IP CEF Set Scheduler Allocate Set Scheduler IntervalSet TCP Synwait Time Enable Unicast RPF on Outside Interfaces Enable LoggingDisable IP Redirects Disable IP Gratuitous ARPsDisable IP Directed Broadcast Disable IP Proxy ARPDisable IP Unreachables Disable MOP ServiceSet Minimum Password Length to Less Than 6 Characters Disable IP Mask ReplySet Banner Set Authentication Failure Rate to Less Than 3 RetriesEnable SSH for Access to the Router Enable Telnet SettingsHelp Button Cisco SDM Express ButtonsAbout Button Exit Button Reconnecting to the Router After Initial ConfigurationApply Changes Button Discard Changes ButtonTesting Your WAN Internet Connection Troubleshooting Tips SDP Troubleshooting TipsIcons OverviewLAN Fields Firewall Fields Internet WAN FieldsEdit/Delete Buttons Username/Login Password/Password is Encrypted FieldsBridge/Do not bridge LAN interface with wireless Checkbox Encrypt password using MD5 hash algorithm CheckboxEdit a Username Refresh/Apply Changes/Discard Changes ButtonsWAN-Unable to Configure WAN Interface WirelessLAN interface configuration Fields No WAN AvailableDelete Connection Enable Firewall/Disable Firewall ButtonsFirewall Unable to Configure NAT Unable to configure Firewall WindowAdd or Edit Address Translation Rule Routing Select All Recommended by Cisco Checkbox Disable Services that Involve Security Risks CheckboxSynchronize with my local PC clock Checkbox Encrypt Passwords CheckboxPing ToolsTo clear the output of the ping command Update SDM from Cisco.comSource Field Destination FieldUpdate SDM from CD Update SDM from Local PCCCO Login Synchronize Checkbox Date and Time PropertiesEdit Date and Time Fields Save Running Config to PC Reset to Factory DefaultsWrite down these steps and then reset the router Apply ButtonReconfiguring Your PC with a Static or a Dynamic IP Address Microsoft Windows NT Feature Not Available Cisco SDM Express Edit Mode Feature Not Available D E IN-2